A range of robust and economical, trapezoid shaped stage boxes, supplied unpopulated or with popular combinations of up to 24 D-series connectors.
Each box comprises of a pair of metal end-plates, top and bottom extrusions and two side plates. The top extrusion has integral designation strip holders on either side (Paper inserts and plastic covers included), whilst the bottom extrusion incorporates raised sections running the length of the box which act as feet or skid runners, giving the box extra protection. Side plates are either blank or punched with up to twelve D series ‘Universal’ cutouts. Connectors are PP series - Black plastic shell with silver plated solder bucket contacts, NC3FPP female (no latch, with retention spring) and NC3MPP male.
The profile of the stagebox is a large trapezoid (125mm width x 86mm height).
Available in three lengths with empty plates or one or two rows of connectors along the sloping sides, plus a resilient 120mm long spiral cable gland at one end, maximum cable diameter 21mm.
Length 1 stageboxes are 120mm long, excluding gland
Length 2 stageboxes are 240mm long, excluding gland
Length 3 stageboxes are 360mm long, excluding gland
Note (1): Length excluding gland.
As well as the above assembled stage boxes, Canford offer a range of spares allowing customers to create stage boxes to their own specific requirements. This range includes top and bottom extrusions in all three lengths. Top extrusions come either with no identification or numbered 1-4, 1-8 or 1-12. Side plates are either blank or with four, eight or twelve D series ‘Universal’ cutouts and end plates again blank, or punched to accept a cable gland or a range of panel mount multipin connectors, allowing alternative connector configurations to be created.
For those wishing to populate or modify existing stageboxes, the extensive range of D-series or "Universal" cutout connectors can be found in our index category; see Universal Series connectors. Hardware such as fixing screws, nuts and washers should be ordered separately. Mounting hardware finish: chemical black plated (CB), bright nickel passivated (BNP), zinc-plated clear passivated (ZCP). Other screw and nut styles are also available, see fasteners.
Canford stageboxes can be supplied assembled and/or wired to your specific requirements. End and side plates can also be supplied with custom cutouts and engraved as required. Please contact Technical Support.
Manufactured by Canford.
Parts should be ordered separately. A complete stagebox requires 1 upper extrusion, 1 lower extrusion, 2 side plates, 2 end plates and a pack of 8 Taptite screws.