CANFORD SMPTE311M HYBRID FIBRE CAMERA CABLE ASSEMBLIES With Lemo connectors and Furukawa 9.2mm cable
The industry standard, hybrid fibre, HD camera cables using Lemo SMPTE304 connectors and Furukawa SMPTE or ARIB standard cable. They are assembled to order by Canford, usually on short lead times. The cables, which are generically referred to as SMPTE311M, incorporate two singlemode fibres, two power conductors and two low-voltage conductors, laid up around a stainless-steel strength member, with a copper braid plus a rugged, abrasion-resistant jacket.
The Lemo 3K.93C stainless steel connectors incorporate the highly-reliable Lemo push-pull latching system and are suitable for up to 20,000 mating cycles. With correct care and cleaning, the fibre contacts are also suitable for this level of endurance.
There are two primary specifications for this type of cable, SMPTE311 and ARIB. Furukawa SMPTE311 type is 'TV-OM-AMS' (also known as 'A grade'), the ARIB type is '2SM-9.2-37.5' (also known as 'J grade'). For detailed specifications see Furukawa SMPTE311 fibre HDTV camera cables.
Cables are also available with the lightweight 6.8mm Furukawa cable (see Canford SMPTE311M hybrid fibre camera cable assemblies with Lemo connectors and Furukawa 6.8mm cable) and with the "studio floor" 16mm type (see Canford SMPTE311M hybrid fibre camera cable assemblies with Lemo connectors and Furukawa 16mm cable).
Panel-mount connectors, with jacketed fibre for direct installation or break-out tails for patching or splicing, are also available; see Canford SMPTE311M hybrid fibre camera cable assemblies with Lemo panel type connectors and Furukawa 9.2mm cable for further details.
FUW: Cable plug with cable gland
PUW: Cable socket with cable gland
Note that pricing shown is for the cable assembly only, supplied loose-coiled or on non-returnable transit reels. Cable drums with external 'tail' supports should be ordered separately, see Canford cable drums - Steel drum, see Canford cable drums - Rubber drum or see Canford Skeleton cable reels - Trolley and Reeling stand for more details. See also the Canford cable drum capacity calculator in the Technical section, to select the correct drum.
Canford's fibre termination facility is certified by Lemo for termination of the Lemo SMPTE304 connectors.
As part of our final test process Canford carry out both insertion and return loss measurement, as well as interferometry measurement on all Fibre terminations. Although some termination facilities do not use interferometry and rely merely on insertion and return loss testing to determine results Canford will always carry out interferometry as standard. Test results including 3D imagery of terminations can be supplied upon request.
Interferometry measures three critical dimensions required for continued reliability, end shape (radius of curvature measured in mm), the polished apex offset (measured in um) and fibre height (measured in nm). These three parameters all fall within tight industry standards which guarantees reliability when mating random connectors.
Ordering note: Custom lengths and connector variations are available, please contact the sales team for a quotation.