With two rows of connectors in 1U panels, each row with 16, 20, 24, 32 or 48 connectors, depending on model, these 3G HD-SDI termination panels are intended for 3G and 1.5G high definition, standard definition and analogue video applications. This redesign of the original DIN style connector, using precision components impedance matched to 75 ohms, make it suitable for 3G HD-SDI and frequencies up to 3GHz.
Manufactured from a lightweight, but extremely rigid, aluminium extrusion, panels are fully-populated with up to 48 pairs of Coax Connectors 3G, 75 ohm isolated DIN 1.0/2.3 adapters, equally spaced across the panel. Due to the high connector-density only a single lacing-bar is fitted to the rear of the panel. On the front, above and below each row of connectors, sits a designation-strip holder with snap-on cover, allowing paper inserts, with 7.5mm of printable height, to be inserted before or after any installation.
The DIN 1.0/2.3 series is used to achieve a very high density of connections on panels and thus may require the use of the dedicated slim-line removal tool to release the mating latch and to un-mate the connector.
Available finished in Dawn Grey (BS4800-10A03) or Black.
DIN 1.0/2.3 patchcords are available, see Canford DIN 1.0/2.3 patchcords. Converter cables to interface between full size BNCs and DIN 1.0/2.3 are also available. See Canford micro BNC and DIN 1.0/2.3 converter cables.
Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website.
Spare 432mm designation-strip paper (not suitable for printers) and covers are available, see Designation strips - snap on.
Recess rack-mounting brackets are available to recess panels within the rack, see Canford Rackbracket - Recess mounting brackets.
For the full range of DIN 1.0/2.3 connectors, see Coax Connectors DIN 1.0/2.3 Connectors And Tools - Male, cable - Crimp - 12G UHD and 3G HD-SDI.