UK Sales: 0191 418 1122 International: +44 191 418 1133
An extensive range of cable strippers, cutters and pliers from leading brands including Paladin Tools, Coastel, Canare, Miller and Welwyn.
LC-CST The LC-CST low-cost, coaxial cable stripper has three blades that can be adjusted for depth of cut. This is done using the supplied hex key, which is housed in a recess in…
A handheld, battery or mains powered, coaxial cable stripper, designed to strip cable to pre-determined lengths in about 4 seconds. The cable is inserted into the end of the tool…
TS100E A handheld rotary stripping tool, with rotary-knob selection for five cable sizes (user adjustable) but preset to V-3C, LV-61S/L-4CFB, V-5C, V-5CFB, LV77S/L-5CFB cables by…
A precision cable stripper for the preparation of coaxial and other multi layer cables up to 10.5mm diameter. The tool has three spring loaded cutting blades which can be…
Slits and strips the jacket from round cables with diameters from 4.5mm to 25mm. Circumferential, longitudinal and spiral cuts mean that mid-point taps are also possible. Cutting…
A combination cutter and stripper suitable for Cat5E/Cat6 twisted pair cables plus coax cables RG59, RG6 (CX100/CT100) and RG11 (CX167/CT167). The spring loaded jaws clamp…
The Paladin ‘Data Surestrip’ is a multi-purpose cutter and stripper for data, telephone and network installations. It works with Cat5, Cat5E and Cat6 screened and unscreened…
These Miller tools feature automatic wire diameter sensing and a flexi-jaw assembly containing a number of individual leaf blades cushioned by a resilient pad which, during the…
These strippers have blades to suit most of our audio cables, and in a single action neatly remove the insulation, leaving conductors exposed. Blades strip wires 0.5mm to 4.00mm…
A range of tools for the preparation of fibre optic cables for termination onto epoxy or pre-polished connectors. ProGrip Fibre Optic Stripping Tools These precision ground…
The Paladin ‘GripP’ series have soft-grip handles and jaws angled at 22 degrees to reduce wrist bending, together with spring-loaded closure for ease of use. Wire stripping areas…
Robust heavy-duty cable and wire cutters, each with two curved cutting notches in the blades to hold the wire and cut cleanly. These are particularly suitable for coax and paired…
A parallel press tool to assist in ethercon CAT6A cable and panel connector termination.
A series of general purpose pliers, intended for heavier duty usage than the Xcelite series. Long snipe pliers Overall length 155mm, jaw length 46mm, jaw width 2.5mm to 8.1mm.
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
This site uses cookies to store information on your computer. By continuing we assume your permission to store cookies, as detailed in our privacy policy.