Compact and extremely rugged, battery- powered fibre-optic power meter and laser sources with interchangeable connector interfaces. The SLS520 light source is designed for singlemode and the SLS525 for multimode, the OPM510 power meter detects both singlemode and multimode. Sources and meters are matched and calibrated allowing accurate measurement of link-loss and absolute power. All have extremely simple and intuitive measurement display and controls or output selection.
Both the power meter and light sources are extremely compact, measuring just 155 x 89 x 33mm and weighing 300g. Operating temperature: -10 to +50 degrees C. Storage temperature: -20 to + 70 degrees C. Power supplies: 9v Alkaline or 1000mAh Lithium battery/ 9v AC adapter.
OPM510 Optical Power Meter
The wavelength detection range is from 850nm to 1625nm, with calibrated detection and display of reference and absolute optical power in dB/dBm of 850, 1300, 1310, 1490, 1550 and 1625 signals. For channel identification, an audible tone alert is produced when the unit detects an incoming 270Hz, 1kHz or 2kHz signal generated by a suitable optical source. The unit is supplied with an SC adapter, optional LC, ST and FC adapters must be ordered separately.
Detector type: InGaAs. Measurement range: -65 to +10dBm. Resolution 0.01dB. Accuracy (measured at 850nm) +/- 0.5db.
Stabilized Light Source
Two models are available, each with calibrated dual-wavelength outputs, offering an output stability of +/-0.05dB, after a 15 minute warm-up period. A 270Hz, 1kHz or 2kHz tone output may also be generated for fibre identification. Both units are supplied with an SC adapter; LC, ST and FC adapters must be ordered separately.
SLS525: Multimode 850nm and 1300nm LED. Spectral width: +/- 40nm.
SLS520: Singlemode 1310nm and 1550nm FP. Spectral width: 5nm and 5nm.
CC-1 Carry case for a single OPM or SLS.
CC-2-3 Carry case for up to three OPM or SLS.
PS-100 Power supply.