UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

4 December 2024

NEUMANN MC 4 MICROPHONE MOUNT For double bass

Stock code
92-8714
Brand
Neumann
Model number
  • MC 4
  • 008698

Order

VAT / Delivery
$92.80
each (ex. VAT)
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us

NEUMANN MICROPHONES - Instrument

Neumann instrument microphones are intended for a wide range of instruments from strings to woodwind, brass to percussion, and are designed for use in broadcast, theatre or stage, or recording studio.

Miniature Clip Mic (MCM) from Neumann uses the KK 14 cardioid condenser capsule along with specific clamping option to 'catch the signature sound' of a wide range of instruments. The KK 14 electret capsule has a frequency range of 20Hz to 20kHz and a maximum SPL of 153dB. The capsule itself measures 12mm in diameter, 11mm in length, and weighs only 2.3g. It is designed to be used with the SH 150 gooseneck stem, a clip of the user's choice, an MCM cable of the user's choice, and the MCM 100 preamplifier. Although the parts can be ordered as separate items, Neumann produce 'sets' containing all you'd need for a particular instrument type.

KK 14 characteristics

Directional pattern: Cardioid. Frequency range: 20Hz-20kHz. Sensitivity: 3.6mV/Pa, -49dBV, 1kHz into 1 kohm. Rated impedance: 10ohms. Equivalent noise level: 31dB, CCIR; 23dB-A, A-weighted. Maximum SPL: 153dB. Maximum output voltage: 12dBu. Power supply: maximum 10V, with Rfeed = 20kohms. Current consumption: 0.22mA. Weight: 2.3g


MCM 100 - Output stage adapter

Neumann MCM 100 is an adapter with 3.5mm jack input and 3-pin XLR output. It is designed to be used with the AC 31 cable for wired operation, and requires +48V phantom power.

Rated impedance: 50Ohms. Rated load impedance: 1000Ohms. Current consumption: 3.5mA, P48. Power supply: +48V, +/-4V. Dimensions (Diam x L): 22 x 77mm. Weight: 96g

Microphone Sets

A selection of sets from Neumann that contain parts required for particular instrumentation.


MCM 114 SET VIO/VIA

This Miniature Clip Mic system is designed to fit the body of a violin, viola, mandolin or similar instrument and contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 1 clip, and 1x soft case.


MCM 114 SET CELLO

This Miniature Clip Mic system is designed to fit directly onto the strings of a cello behind the bridge and contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 2 clip, and 1x soft case.


MCM 114 SET DOUBLE BASS

Designed to fit onto the strings of a double bass behind the bridge and contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, MCM 100 output stage, WS 110 windshield, MC 3 clip. Delivered in a handy soft case.


MCM 114 SET WOODWINDS

A complete set for using the Miniature Clip Mic system on an oboe, clarinet, flute, recorder, harp or bassoon. The kit contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 5 clip, and 1x soft case.


MCM 114 SET BRASS/SAX/UNI

Designed to clip onto the bell of a trumpet, trombone, saxophone or other horn, on percussion instruments and on pole stands and contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 6 clip, and 1x soft case.


MCM 114 SET DRUMS/PERC

This set is for use with percussion instruments and drums, and contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 7 clip, and 1x soft case.


MCM 114 STEREO SET PIANO

A complete stereo set for use in or on a piano or grand piano and containing 2x KK 14 capsules, 2x SH 150 goosenecks, 2x KC 1 cable braces, 2x AC 31 cables, 2x MCM 100 output stage adapters, 2x WS 110 windshields, 2x MC 8 clips, and 2x soft cases.


MCM 114 SET GUITAR

This MCM kit is for use with a guitar, ukulele, Dobro, acoustic bass or cello. It contains 1x KK 14 capsule, 1x SH 150 gooseneck, 1x KC 1 cable brace, 1x AC 31 cable, 1x MCM 100 output stage, 1x WS 110 windshield, 1x MC 9 clip, and 1x soft case.

Accessories and Spares

Neumann MCM clamps and cables are included in the above mentioned sets, however they can also be ordered as spares or replacements.


MC 1 - High strings

MC1 is designed to mount the SH 150 gooseneck to the body of a violin, viola, mandolin, or similar instrument. A self-adjusting spring mechanism allows the rubber-coated grip to clamp onto an instrument of 32-50mm in thickness without damaging it. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 16g.


MC 2 - Cello strings

MC 2 is designed to mount the SH 150 gooseneck directly to the strings of a cello below the bridge. The clip is compatible with string diameters of 0.6 to 2.3mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 12g.


MC 3 - Double bass strings

MC 3 is designed to mount the SH 150 gooseneck directly to the strings of a double bass below the bridge. The clip is compatible with string diameters of 1 to 2.6mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 20g.


MC 4 - Double bass

MC 4 is designed to mount the SH 150 gooseneck to the rib of a double bass. A self-adjusting spring mechanism allows the rubber-coated grip to clamp onto an instrument of 202-246mm in thickness without damaging it. An included reducer allows for a slimmer span range of 169-213mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 38g.


MC 5 - Universal strap

MC 5 is a universal strap with hook and loop fabric, designed to mount the SH 150 gooseneck to an oboe, clarinet, recorder, bassoon, flute, harp, or similar instrument with that spans between 10mm and 80mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 20g.


MC 6 - Universal clamp

MC 6 universal clamp features a miniature clip that allows positioning on the bell of a trumpet, trombone, saxophone, or french horn, however it is also useful for clamping to percussion or stand rods. The clip has an clamping span of 0-20mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 20g.


MC 7 - Drum rims

MC 7 clip allows the user to mount the SH 150 gooseneck directly onto the rim of a snare drum, tom, or similar instrument. The clip has an clamping span of 0-20mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 10g.


MC 8 - Piano, magnetic

MC 8 is a magnetic clip designed to mount the SH 150 gooseneck to or into an upright or grand piano. The clip has an clamping span of 0-20mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement.


MC 9 - Guitar

MC 9 clamp is designed for mounting the SH 150 gooseneck to the rib of a guitar, ukulele, dobro, acoustic bass, or cello. A self-adjusting spring mechanism allows the rubber-coated grip to clamp onto an instrument of 85-132mm in thickness without damaging it. An included reducer allows for a slimmer span range of 52-99mm. The gooseneck holding clip rotates in 45-degree increments for best positioning, and locks to prevent unwanted movement. Weight: 25g.


SH 150 - Gooseneck

SH 150 is a flexible gooseneck with integrated cable, measuring 150mm in length. It is designed to enable distance between the KK 14 microphone capsule and MCM series clip. The output socket allows the connection of AC31/AC32/AC33/AC34 cable. Weight 20g.


AC 31 - 3.5mm locking jack

A 1.8m cable to link microphone capsule to compatible device with 3.5mm locking jack input, including MCM 100 preamplifier.


AC 32 - 3-pin Lemo

A 1.8m cable to link microphone capsule to compatible device with 3-pin Lemo input.


AC 33 - Micro-dot

A 1.8m cable to link microphone capsule to compatible device with Micro-dot type input.


AC 34 - 3-pin mini XLR

A 1.8m cable to link microphone capsule to compatible device with 3-pin mini-XLR input.