UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

21 April 2024
  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

SENNHEISER HEADSETS

41 items

All the models in this selection of headsets are intended for professional use, and have dynamic earphones. They include designs with dynamic microphones tailored for communications environments as well as dynamic and electret microphones designed specifically for use in broadcasting applications.

HMD 300 Series

The 64ohm, closed back, dynamic HMD 300 and HMD 301 are the replacement models for the popular HMD 280 and HMD 281 Pro headsets. Designed for communications in high noise environments, the dynamic, noise cancelling microphone has a hypercardioid pattern and is mounted on a flexible gooseneck to give the optimum 2cm distance from voice source to capsule. ‘ActiveGard’ limiting, which protects the user from volume peaks, can be accessed by a switch located under a panel on the boom arm side of the headset.

Frequency response: 60Hz – 25kHz, 1kHz. SPL: 108dB, +/- 3dB. Impedance: 64ohm. Microphone: Dynamic, 300ohms, 0.4mV/Pa. Response: 80Hz – 16kHz. Weight: 319g.

Variants


HMD 300-XQ-2 Pro - Dual ear, 64 ohms

This is as the HMD 300 Pro, except includes a cable terminated with 6.35mm jack and 3-pin male XLR


HMD 301 Pro - Single ear, 64 ohms

A variant of HMD 300 Pro, the HMD 301 Pro has a single earphone, and is aimed at 'talkback situations in film and TV applications'. Specifications are as the HMD 300 Pro except the following. Weight: 242g.

HMS 27 Broadcast Series

The HMS 27 range of broadcast headsets have circumaural earcups, with added, active, noise-reduction in the HMDC-27 model. Both HMD 27 and HMDC 27 are equipped with a dynamic, hyper-cardioid microphone with a response of 40Hz to 18kHz. The HME 27 has a pre-polarised cardioid electret microphone with P48 phantom powering interface where more clarity and higher intelligibility is required. Designed for use in TV and radio broadcast applications, where high maximum SPL and good noise attenuation is preferred. All variants of the HMD 27 have an optionally activated 'ActiveGard' which protects the user from any volume peaks above 110dB. At around 240g without cable and with the ability to have the microphone on either the left or right-hand side, they are a comfortable wear for prolonged periods.

The headband has an automatically-opening, two-piece headband to reduce pressure on the head and wide headband padding is included to convert to a more conventional single piece headband. The earphones have soft, over the ear, pads. The cable connection point is single-sided. Compatible with 26-II series cables.

Closed-back, circumaural, dynamic earphones. Response: 8Hz to 18kHz. Microphone: Dynamic/condenser, response: 40Hz to 16kHz dynamic, 40Hz to 20kHz condenser. Weight: 240g.

Variants


HMD 27 - Dual ear, 64 ohms

Sensitivity: 112dB SPL, 1V, 1kHz. Supplied without cable.


HME 27 - Dual ear, 64 ohms

Sensitivity: 112dB SPL, 1V, 1kHz. Supplied without cable.


HMDC 27 - Dual ear, 600 ohms

Sensitivity: 112dB SPL, 1V, 1kHz. Supplied with II-X3K1 2m straight copper cable, with 3-pin male XLR and 6.35mm jack connectors.

HMD 26-II Series

With a dynamic, hyper-cardioid microphone with a response up to 16kHz, these are lightweight, closed-ear, supra-aural, headsets designed for use in TV and radio broadcast applications, with high maximum SPL and high wearing comfort, in combination with a good noise attenuation. All variants of the HMD 26-II are equipped with 'ActiveGard' which protects the user from volume peaks. Designed for applications in noisy environments, the microphone has low sensitivity against structure-born sound. It can be used either on the left or right-hand side.

The flexible gooseneck microphone boom allows an individual adjustment to the correct position. The headband has a two-piece headband; the earphones have soft ear pads. The cable is single sided. 'Flip-away' earphones allow single-sided listening. The microphone is muted when the boom position is upright.

Closed-back, supra aural, dynamic earphones. Response: 20Hz-18kHz. Microphone: Dynamic, 300 ohms, 0.4mV/Pa, response: 40Hz to 16kHz. Weight: 200g.

Variants


HMD 26-II-100 - Dual ear, 100 ohms

Sensitivity: 115dB SPL, 1V, 1kHz. Supplied without cable.


HMD 26-II-600 - Dual ear, 600 ohms

Sensitivity: 107dB SPL, 1V, 1kHz. Supplied without cable.


HMD 26-II-600-8 - Dual ear, 600 ohms

Sensitivity: 107dB SPL, 1V, 1kHz. Copper, two metre cable, unterminated.


HMD 26-II-600S - Single ear, 600 ohms

Sensitivity: 107dB SPL, 1V, 1kHz. Supplied without cable.


HMD 26-II-600-X3K1 - Dual ear, 600 ohms

Sensitivity: 107dB SPL, 1V, 1kHz. Steel, 2 metre cable, with 3-pin male XLR and 6.35mm jack connectors.

HME 26-II Series

Similar to the HMD 26-II models, these have an electret condenser microphones, with a response up to 20kHz. Designed for use in TV and radio broadcast applications, they have high maximum SPL and high wearing comfort, in combination with a good noise attenuation. All variants of the HME 26-II are equipped with 'ActiveGard' which protects the user from volume peaks. Designed for applications in noisy environments, the microphone has low sensitivity against structure-born sound. It can be used either on the left or right-hand side.

The flexible gooseneck microphone boom allows an individual adjustment to the correct position. The headband has a two-piece headband; the earphones have soft ear pads. The cable is single sided. 'Flip-away' earphones allow single-sided listening. The microphone is muted when the boom position is upright.

Closed-back, supra aural, dynamic earphones. Response: 20Hz-18kHz. Microphone: Electret, 4.7k ohms minimum load, 4 mV/Pa, response: 40Hz to 20kHz, supply voltage 5-15V DC. Weight: 200g.

Variants


HME 26-II-100 - Dual ear, 100 ohms - Omnidirectional microphone

Sensitivity: 115dB SPL, 1V, 1kHz. Supplied without cable.


HME 26-II-100(4)-P48 - Dual ear, 100 ohms - Cardioid microphone

Sensitivity: 115dB SPL, 1V, 1kHz. Supplied without cable. Requires P48 phantom power


HME 26-II-600 - Dual ear, 600 ohms - Omni-directional microphone.

Sensitivity: 107dB SPL, 1V, 1kHz. Supplied without cable.


HME 26-II-600(4) - Dual ear, 600 ohms - Cardioid microphone

Sensitivity: 107dB SPL, 1V, 1kHz. Supplied without cable.

HMD 46 Series


HMD 46-31

The HMD 46-31 has a dynamic microphone with noise compensation and a frequency response up to 12kHz. Designed for use in air traffic control applications, these lightweight headsets have soft ear pads for comfort.

The single-sided 1.85m cable is detachable for easy replacement.
Sensitivity: 103dB SPL, 1V, 1kHz. Weight (without cable): 150g. Supplied without cable.


HMD 46-3

This 300 ohm, double-sided headset has a uni-directional, dynamic microphone with noise cancelling filters that produces frequencies of 100 - 12,000Hz, it also uses ActiveGard processing to protect the user from volume peaks. The stereo earphones are capable of producing 20 - 14,000Hz. A single-sided cable entry and rotating microphone boom allows the operator to wear the headset with the microphone to the left or right.

Sensitivity: 83dB SPL, 1V, 1kHz. Weight (without cable): 150g. Supplied without detachable cable.

Spare Cables


502533 CABLE-H-6

A 3m, coiled copper cable that is compatible with HMD 26-II and HME 26-II. The cable is also compatible with HME 26-II-P48 and HME 27 headsets, however a P48 power supply is required. Cable is unterminated.


502456 CABLE-H-X3K1

A 3m, coiled copper cable that is compatible with HMD 26-II. The cable is also compatible with HME 26-II-P48 and HME 27 headsets, however a P48 power supply is required. The cable is not compatible with HME 26-II. terminated with 3-pin male XLR and 6.3mm jack.


505782 CABLE-II-X3K1

A 2m, straight copper cable that is compatible with HMD 26-II. The cable is also compatible with HME 26-II-P48 and HME 27 headsets, however a P48 power supply is required. The cable is not compatible with HME 26-II. Terminated with 3-pin male XLR and 6.3mm jack.


505783 CABLE-II-X3K1-P48

A 2m, straight copper cable that is compatible with HME 26-II when used with the P48 power supply. The cable is not compatible with HME 26-II-P48 or HME 27 due to the integrated P48 amplifier within the earcup. Terminated with 3-pin male XLR and 6.3mm jack.


505784 CABLE-II-X4F

A 2m, straight copper cable with coiled segment to help reduce structure born noise. The cable is compatible with HMD 300 PRO, HMD 301 PRO, HMD 26-II, HME 26-II, and HMD 27. The cable is not compatible with HME 26-II-P48 nor HME 27 or HMDC 27 due to the integrated P48 amplifier within the earcup. Terminated with 4-pin female XLR connector.


505785 CABLE-II-X5

A 2m, straight copper cable with coiled segment to help reduce structure born noise. The cable is compatible with HMD 300 PRO, HMD 301 PRO, HMD 26-II, HME 26-II, and HMD 27. The cable is not compatible with HME 26-II-P48 nor HME 27 or HMDC 27 due to the integrated P48 amplifier within the earcup. Terminated with 5-pin male XLR connector.


508545 CABLE-II-6

A 1.85m, straight copper cable with coiled segment to help reduce structure born noise. The cable is compatible with HMD 300 PRO, HMD 301 PRO, HMD 26-II, and HME 26-II. The cable is also compatible with HME 26-II-P48, HMD 27, HMDC 27, and HME 27 when used with a P48 power supply. 508545 is supplied unterminated, however 508545X4 version is the same cable but terminated with 4-pin females XLR connector.


505797 CABLE-II-8

A 2m, straight copper cable with coiled segment to help reduce structure born noise. The cable is compatible with HMD 300 PRO, HMD 301 PRO, HMD 26-II, and HME 26-II. The cable is also compatible with HME 26-II-P48, HMD 27, HMDC 27, and HME 27 when used with a P48 power supply. 505797 is supplied unterminated.

  Description Price £
ex. VAT
Add to basket
Delivery
SENNHEISER HMD 300 PRO HEADSET Stereo 64 ohms, 300 ohm dynamic mic, without cable Stock code: 56-4124
Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
£207.50
SENNHEISER HMD 300 PRO HEADSET Mono 64 ohms, 300 ohm dynamic mic, XLR4F, 1.85m Stock code: 56-4123
Assembled to order, cancellations may incur charges, available in 2‑3 weeks. Need it sooner? Call us
£274.40
SENNHEISER HMD 300-XQ-2 PRO HEADSET Stereo 64 ohms, 300 ohm dynamic mic, 6.35mm jack, XLR3M Stock code: 56-4125
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£215.80
SENNHEISER HMD 301 PRO HEADSET Single ear 64 ohms, 300 ohm dynamic mic, XLR4F, 1.85m Stock code: 56-4130
Assembled to order, cancellations may incur charges, available in 2‑3 weeks. Need it sooner? Call us
£251.40
SENNHEISER HMD 301 PRO HEADSET Single ear 64 ohms, 300 ohm dynamic mic, without cable Stock code: 56-4126
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£182.50
SENNHEISER HMD 27 HEADSET Stereo, 64 ohms, 300 ohm dyn mic, without cable Stock code: 56-4147
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
£399.10
SENNHEISER HME 27 HEADSET Stereo, 64 ohms, cardi electret mic, without cable Stock code: 56-4148
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£399.10
SENNHEISER HMDC 27 HEADSET Stereo, 600 ohms, 300 ohm dyn mic, 2m cable, 6.35mm jack, XLR3M Stock code: 56-4149
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£474.10
SENNHEISER HMD 26-II-100 HEADSET Stereo, 100 ohms, 300 ohm dyn mic, without cable Stock code: 56-4101
2 in stock Need more?
£365.80
SENNHEISER HMD 26-II-600 HEADSET Stereo, 600 ohms, 300 ohm dyn mic, without cable Stock code: 56-4103
Ordered on demand, available in Call.
£365.80
SENNHEISER HMD 26-II-600-8 HEADSET Stereo, 600 ohms, 300 ohm dyn mic, 2m copper cable, no plug Stock code: 56-4104
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£399.10
SENNHEISER HMD 26-II-600S HEADSET Single ear, 600 ohms, 300 ohm dyn mic, without cable Stock code: 56-4105
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£349.10
SENNHEISER HMD 26-II-600-X3K1 HEADSET Stereo, 600 ohm, 300ohm dyn mic, 2m cable, 6.35mm jack, XLR3M Stock code: 56-4106
2 in stock Need more?
£440.80
SENNHEISER HME 26-II-100 HEADSET Stereo, 100 ohms, omni electret mic, 5-15V, without cable Stock code: 56-4111
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£365.80
SENNHEISER HME 26-II-100(4)-P48 HEADSET Stereo, 100 ohms, cardioid electret mic, without cable Stock code: 56-4121
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£399.10
SENNHEISER HME 26-II-600 HEADSET Stereo, 600 ohms, omni electret mic, 5-15V, without cable Stock code: 56-4113
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£365.80
SENNHEISER HME 26-II-600(4) HEADSET Stereo, 600 ohms, cardioid electret mic, 5-15V, without cable Stock code: 56-4122
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£365.80
SENNHEISER HMD 46-31 HEADSET Stereo 300 ohms, dynamic microphone, 200 ohms, without cable Stock code: 56-4129
4 in stock Need more?
£290.80
SENNHEISER HMD 46-3 HEADSET Stereo 300ohms, dynamic microphone, 200 ohms, without cable Stock code: 56-4127
Ordered on demand, available in Call.
£290.80
SENNHEISER 502533 CABLE-H-6 Copper, for HMD25-II, HME26-II/P48, HME27, unterminated, 3m Stock code: 56-4133
5 in stock Need more?
£65.00
SENNHEISER 502456 CABLE-H-X3K1 Helix, for HMD26-II, HME26-II-P48, HME27, XLR3M/6.35mm stereo jack Stock code: 56-4135
Temporarily out of stock but available to backorder, expected: 28/06/2024.
£82.50
SENNHEISER 505782 CABLE-II-X3K1 Copper, for HMD26-II, HME26-II-P48, HME27, XLR3M/6.35mm stereo jack Stock code: 56-4138
Temporarily out of stock but available to backorder, expected: 04/07/2024.
£72.50
SENNHEISER 505783 CABLE-II-X3K1-P48 Copper, for HME26-II, XLR3M/6.35mm jack, with 48V adapter, 2m Stock code: 56-4139
Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£107.50
SENNHEISER 505784 CABLE-II-X4F Copper, for HMD300/301PRO, HMD26-II, HME26-II, HMD27, with XLR4F, 2m Stock code: 56-4141
Ordered on demand, available in 1‑2 months. Need it sooner? Call us
£72.50
SENNHEISER 505785 CABLE-II-X5 Copper, for HMD300/301PRO, HMD26-II, HME26-II, HMD27, with XLR5M, 2m Stock code: 56-4142
Ordered on demand, available in Call.
£72.50
SENNHEISER 508545 CABLE-II-6 Copper, for HMD300/301PRO, HMD26-II, HME26-II, unterminated, 1.85m Stock code: 56-4144
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£58.33
SENNHEISER 508545X4 CABLE-II-6 Copper, for HMD300/301PRO, HMD26-II, HME26-II, with XLR4F, 1.85m Stock code: 56-4145
Assembled to order, available in 3‑4 weeks. Need it sooner? Call us
£64.44
SENNHEISER 505797 CABLE-II-8 Copper, for HMD300/301PRO, HMD26-II, HME26-II, unterminated, 2m Stock code: 56-4146
5 in stock Need more?
£58.33
SENNHEISER 595222 SPARE EARPADS For HMD/E26 headsets (pair) Stock code: 56-4151
Ordered on demand, available in 3‑5 working days. Need it sooner? Call us
£27.64
per pair
SENNHEISER 515295 SPARE EARPADS For HMD46 headsets (pair) Stock code: 56-4152
29 in stock Need more?
£6.78
per pair
SENNHEISER 535803 SPARE MIC WINDSHIELD For HME26 headset, small size Stock code: 56-4163
1 in stock Need more?
£7.24
SENNHEISER 515297 SPARE MIC WINDSHIELD For HME26/46 headset Stock code: 56-4164
Ordered on demand, available in 3‑5 working days. Need it sooner? Call us
£4.17
SENNHEISER 532732 SPARE MIC WINDSHIELD For HMD26 headset, small size Stock code: 56-4153
3 in stock Need more?
£8.72
SENNHEISER 540300 SPARE MIC WINDSHIELD For HMD26 headset, large size Stock code: 56-4154
Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
£9.94
SENNHEISER 543656 SPARE MIC WINDSHIELD For HMD46 headset Stock code: 56-4155
11 in stock Need more?
£11.06
SENNHEISER 092804 MZW 45 SPARE MIC WINDSHIELD For headsets with MKE 45-1 microphone Stock code: 56-4161
Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
£8.70
SENNHEISER 556955 SPARE MICROPHONE BOOM ARM ASSEMBLY For HMD26 headset, c/w microphone Stock code: 56-4157
3 in stock Need more?
£133.40
SENNHEISER 541392 SPARE MICROPHONE BOOM ARM ASSEMBLY For HME26 headset, c/w microphone Stock code: 56-4158
Ordered on demand, available in 1‑2 months. Need it sooner? Call us
£228.80
SENNHEISER 540370 SPARE MICROPHONE BOOM ARM ASSEMBLY For HMD46 headset, c/w microphone Stock code: 56-4159
Ordered on demand, available in 3‑4 weeks. Need it sooner? Call us
£126.70
SENNHEISER 578878 SPARE TEMPLE PAD For HMD26/46 single-sided headset Stock code: 56-4162
Ordered on demand, available in 1‑2 months. Need it sooner? Call us
£8.69
SENNHEISER 093645 SPARE LATCH FOR HEADBAND For HMD26/HME26 headset Stock code: 56-4160
No longer manufactured. Please contact Technical Support for alternatives.