CANFORD CAT5E-F-R CAT 5E DATA CABLE Stranded conductor, screened - Deployable, ruggedised
This special version of Canford's CAT5E-F flexible Cat5E cable has a polyurethane outer jacket providing greater abrasion resistance (but slightly less flexibility) than the PVC on the standard design. Otherwise it is a similar F/UTP construction.
It is suitable for use with both standard RJ45 connectors (round entry version), the Neutrik Ethercon and most other ruggedised RJ45 designs, or any other connector with a suitably sized entry gland.
Note: The jacket on this cable is "pressure extruded" so minimises the amount of polyurethane material needed and thus keeps costs down. It therefore does not have a smooth outer profile. For a Cat5E cable with polyurethane jacket and a smooth, round profile, see 31-948 CAT5E-R (this is a double screened SF/UTP design).
The cable is also suitable for DMX512 applications. The greater heat tolerance of polyurethane may be useful.
||7/0.16mm (0.14mm sq.) plain copper
||Foamed polyethylene, according to CW1308 colour code (see Cable Colour Codes in the Product Resources side-panel)
||Two insulated conductors twisted together, pairs twisted together
||Aluminium/polyester tape (aluminium side in)
||7/0.2mm tinned copper wire (0.22mm sq.), laid up with cores
||Semi-matt polyurethane, OD.6.0mm, black
||100 +/-15 ohms
||3.0dB/100m (1MHz), 8.5dB/100m (10MHz), 25.5dB (100MHz) (typical measured values)
|Near end crosstalk:
||67dB (1MHz), 53dB (10MHz)
||Available in any multiple of 1 metre