Mille-Tie is a quick-fit fastener for use in data, video and audio cabling installations, and are particularly recommended for use with HD video cabling, where it is critical to the cable performance that cable ties do not crush the cable. The design of the Mille-Tie means that it is impossible to over-tighten the tie during application. The 305mm long strips are made from high-grade polyurethane which imparts both strength and flexibility to the product, making Mille-Ties ideal for gently securing delicate cables.
The design of the tie makes full use of this inherent softness by incorporating a pressure-sensitive latch. This is preset to slip back one notch if too much force is applied, and thereby helps prevent the type of cable compression that can lead to reduced performance from the system. The Mille-Tie strip has a design that allows surplus tie to be trimmed off and used elsewhere, thus minimising waste. Ties can also be released for re-use by threading the end tab back through the tie. The soft nature of the material makes them easy to cut, and leaves no sharp edges.
The Millepede original design is protected by UK patent 0765281 and European patent EP0765281 held by Millepede International Ltd. Note that the Wrapstrap product is Canford stock code 39-146, and should not be confused with the original Millepede non-crush tie.
||33 (1 per 8mm approx.)
|Maximum bundle size:
|Minimum bundle size:
||Low Smoke to BS6853:1999 App.D;D8.3
||Zero Halogen to IEC754-1:1994