A comprehensive range of accessories to complement K&M loudspeaker stands and mounts. All accessories are finished in black unless otherwise stated.
Safety Collars and Cable Clamps
Packaged in pairs, these cable clamps are suitable for speaker or lighting stands with diameters of 35-42mm. The 'wear-resistant' plastic clamp allows for neat placement of cables for safety and aesthetic uses.
Available in two sizes, 21320 safety ring is designed to be slid over the extension tube of a speaker or lighting stand, and lock in place to prevent stand slippage. Both variants are manufactured from 'impact-resistant' plastic and are black in colour.
Options:
21320-000-55 fits 35mm tube diameter
21320-030-55 fits 30mm tube diameter
External Flange Plates
'External' flange for mounting onto the bottom of equipment. Locking-screw to tighten onto top of stand. Suits all stands with 35mm spigot. Flange plate dimensions 175 × 110mm, height 140mm. Two slots 9.5mm × 35mm, fixing centres range 100-152mm. Weight: 0.68kg.
'External' flange for mounting onto the bottom of speakers. Locking screw to tighten onto top of stand. Suits all stands with 35mm spigot. Flange plate dimensions 146 x 40mm, height 105mm. Two 11mm mounting holes with fixing centres of 115mm. Weight: 0.56kg.
Top Hats
This connector plate is designed to be mounted in a subwoofer as inverted 'top-hat'. It is compatible with distance rods terminating with M20 bolt. Weight: 0.24kg
'Internal', plastic, 'top-hat' flange-adapter for the bottom of loudspeakers, secured via four 6.5mm mounting holes on flange plate. Slips onto all stands with a 35mm spigot. Flange plate diameter 105mm with a depth of 60.5mm. Weight: 0.077kg.
'Internal', zinc, die-cast, 'top-hat' flange-adapter for the bottom of loudspeakers, secured via four 6.5mm mounting holes on flange plate. Slips onto all stands with a 35mm spigot. Flange plate diameter 105mm with a depth of 75mm. Weight: 0.34kg.
'Internal', plastic coated, steel, 'top-hat' flange-adapter for the bottom of loudspeakers, secured via four 6.5mm mounting holes on flange plate. Slips onto all stands with a 25mm spigot. Flange plate diameter 105mm with a depth of 78mm. Weight: 0.38kg.
Flange Adapters - Fixed
Available in four sizes, 24521 reducing flange adapters are designed to convert a 35mm diameter speaker pole to fit differing thread types or diameters. All models feature large hand knob for tightening.
Options:
24521-070-55 M8 x 18mm
24521-000-55 M10 x 12mm
24521-300-55 3/8-inch x 12mm
24521-250-55 25mm bolt
A reducer flange similar to 24521-000-55 however the M10 connection is female. Length: 100mm. Weight: 0.46kg
Polyamide adapter sleeve for speaker flanges with an inside diameter of 38mm, suited to stands with spigots of 35mm diameter. Length: 102mm. Weight: 0.01kg.
Stand adapter for the mounting of two speakers which are fitted with flange adapters. Suited to stands with spigots of 35mm diameter, secured by locking screw. Two speaker spigots 35mm diameter x 120mm are fixed to a T-bar with adjustable width of 310 - 490mm. Maximum load: 2x 25kg, Weight: 1.48kg.
Flange Adapters - Tilting
Speaker tilt adapter, fits and locks onto all stands with 35mm spigot. Provides a secondary 35mm spigot with angle adjustment from 0 degrees vertical to 15 degrees tilt, secured by a locking screw. Locks into speakers via expanding mandrel system controlled by easy-to-use ring-lock. Height 230mm, maximum load capacity 25kg, weight 0.85 kg.
Speaker tilt adapter, fits and locks onto all stands with 35mm spigot. Provides a secondary 35mm spigot with angle adjustment from 0 degrees vertical to 15 degrees tilt, secured by a locking screw. Height: 300mm. Maximum load capacity: 25kg. Weight: 0.67kg.
Stand adapter with tilt, for mounting equipment without the need for an incorporated flange. Suited to stands with a spigot diameter of 35mm, locking in position via clamping screw. Tilt adjustment of 30 degrees. two 10.5mm fixing holes with a fixing range of 70 - 76.2mm. Maximum load capacity: 15kg. Weight: 0.547kg.
Support Plates
26792 - Universal Monitor Plate
Support plate for monitor speakers, screws to the top of the K&M 26795 monitor stand. Available in three sizes: 240 x 5 x 200mm, 320 x 5 x 280mm and 420 x 5 x 380mm. Supplied complete with four rubber feet and four spikes.
19688 - For JBL Control 1 Pro
Stand adapter to mount the JBL Control 1 loudspeaker on a 3/8 inch threaded stud such as is found on a microphone stand. The adjustable bracket securely holds the base of the Control 1. A tilt adjustment of 250 degrees and locking knob allow the speaker to be positioned to the desired angle. Supplied with 3/8 inch to 5/8 inch thread adapter. Weight: 0.36kg.
Adapter Panels
The following are for use with the 24471 and 24481 wall mounts and the 24496 ceiling mount. They consist of a metal plate and two fasteners to attach the plate to the mount. The plates are punched with a variety of mounting holes to suit many popular loudspeakers, including models from Bose, Focal, Genelec, JBL, K+H, Neumann and Tannoy. The terms vertical and horizontal refer to the orientation of the plate when fixed to the mounts, which are assumed to be mounted vertically in each case, to allow the tilt mechanisms to work.
24352 Adapter panel 1, vertical
'Universal' mounting adapter panel, vertical orientation. The plate has dimensions 95 x 150(h x v)mm with several sets of mounting holes: 4x M8 on 70 x 127(h x v)mm pitch, 4x M6 on 50.8 x 107.9(h x v)mm pitch, 4x M6 on 62 x 47(h x v)mm pitch combined with two slots for M6, 70 to 76.2(h)mm pitch. Weight: 0.33kg. Available in black or white finish.
24354 Adapter panel 2, horizontal
'Universal' mounting adapter panel, horizontal orientation. The plate has dimensions 150 x 95(h x v)mm with several sets of mounting holes: 4x M8 on 127 x 69.9(h x v)mm pitch, 4x M6 on 107.9 x 50.8(h x v)mm pitch, and 2x slots for M6, 70 to 76.2(h)mm pitch. Weight: 0.33kg. Available in black and white finish.
24356 Adapter panel 3, horizontal
Adapter panel, horizontal orientation. Plate dimensions 71 x 128(h x v)mm, with four mounting holes for M6 fasteners on 50.8 x 107.9(h x v)mm pitch. Weight: 0.22kg. Available in black or white finish.
24357 Adapter panel 4, vertical
Adapter panel, vertical orientation. T-shaped plate dimensions 128 x 90(h x )mm overall, with four mounting holes for M6 fasteners, 107.9 x 50.8(h x v)mm pitch. Weight: 0.24kg. Available in black or white finish.
24358 Adapter panel 5, vertical
Adapter panel, vertical orientation. Plate dimensions 40 x 145(h x v)mm with two mounting holes for M10 fasteners, 115(v)mm pitch. Weight: 0.24kg. Available in black or white finish.
24359 Adapter panel 6, horizontal/vertical
Adapter panel, horizontal and vertical orientation. T-shaped plate dimensions 90 x 100(h x v)mm overall with one pair of mounting slots for M6 fasteners on 70 - 76.2(h)mm pitch and one pair of mounting holes for M6 fasteners on 70(v)mm pitch. Weight: 0.14kg. Supplied complete with locking screws for Genelec 8000 Series. Available in black or white finish.
This adapter panel has the same features as 24359 however it has a u-shaped bend to allow space for cable routing. Compatible with Genelec 8020, 8030, 8320, and 8330 loudspeakers, see GENELEC ACTIVE LOUDSPEAKERS - 8000 Series monitors
Carrying Cases
Carrying case - For up to two speaker stands. 1680D nylon material with separate internal compartments and padded handles. Case entry via dual zippered panel at the end of the case. Dimensions: 1200mm. Weight: 2.1kg.
Carrying case – For up to two speaker/lighting stands. The waterproof nylon case has two inner compartments, each with zip fastener. Two handles can be tethered with wrap-around grip. Dimensions: 1200 x 250 x 250mm. Weight: 1kg
Carrying case – For up to two monitor/speaker stands. Manufactured from waterproof nylon, access to the two inner compartments is by way of draw-string closure at one end of the bag. Two handles can be tethered with wrap-around grip. Dimensions: 1290 x 140 x 140mm. Weight: 0.36kg
Carrying case – For up to two speaker/lighting stands. The waterproof nylon case has two inner compartments, each with zip fastener. Two handles can be tethered with wrap-around grip. Dimensions: 1200 x 250 x 250mm. Weight: 1.2kg