UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

11 December 2024

CANFORD CABLE DRUM CD2

Stock code
39-021
Brand
Canford
Model number
  • CD2
GTIN
5056704722101
CANFORD CABLE DRUM CD2
CANFORD CABLE DRUM CD2

CANFORD CABLE DRUMS - Steel drum, fully-enclosed steel frame

Steel cable drums with black nylon dipped finish. Spare drums, frames and various spare accessories are also available. Units may be stacked up to 3 high to save floor space.


CD1

Handle is integral with the drum, and the frame is fitted with an unbreakable, spring loaded, vibration-resistant drum-retaining latch. Spring clips for connector retention are available as an optional extra, supplied complete with fixing hardware.


CD2, 3 series (CD3, CD3.45, CD3.6)

Larger frame series, with a variety of drum capacities. The winding handle is a separate unit which rotates through 180 degrees for compact storage. A chained drum-locating pin prevents drum rotation during transit. These are also available to special order with a reinforced frame, for heavy duty industrial cable applications (CD2HD, CD3HD).

The 3 series is also available supplied fitted with a set of four castors, 2x braked and 2x un-braked, on threaded M10 steel studs. These mount to the base of the Cable Drum Frame and are secured with the supplied M10 nuts. Each castor has 360 degree turning, 100kg of load capacity and is 80mm high.

Technical Specification:

Dimensions

Model Flange Hub diam Drum width Weight
CD1 320mm 90mm 125mm 6.25kg
CD2 450mm 230mm 150mm 9.75kg
CD3 450mm 230mm 300mm 11.25kg
CD3.45 450mm 230mm 450mm 13.00kg
CD3.6 450mm 230mm 600mm 14.50kg

Capacities (tight pack)

Model 6.5mm cable 12.5mm cable 15.9mm cable
(HST,SDV-L) (FSM12, PSF1/9) (FSJ8, FSM24)
CD1 192m 51m not recommended
CD2 369m 91m 49m
CD3 755m 190m 104m
CD3.45 1141m 290m 165m
CD3.6 1527m 389m 220m

For help finding a cable drum to meet your requirements see the Cable Drum Capacity Calculator.

Ordering Note

All figures given are based upon a theoretical ‘tight pack’ and do not take into account any maximum weight loadings for drums being exceeded. It is recommended that an allowance of up to 30% be made to accommodate loose winding. A lower percentage could be used if the crew are known to always wind the drums neatly!