UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

28 February 2024
  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

RODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, black

Stock code
74-280
Brand
Rode
Model number
  • WIRELESS ME
Colour
  • BlackBlack
RODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, black
RODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, blackRODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, black

RODE WIRELESS SYSTEMS

Rode wireless microphone systems have been designed for use in ENG, studio, or interview situations. They are popular due to the ease of setup and their form size.

Wireless PRO Series

Wireless PRO from Rode has been designed as a compact wireless microphone and audio recording device for broadcast, wedding video, conference, and educational environments.


Wireless PRO

Utilising series IV 2.4GHz digital transmission with 128-bit encryption, Rode Wireless PRO delivers audio up to a range of 260m. In addition to the functionality of a wireless system, Rode Wireless PRO offers 32-bit float on-board recording to ensure the audio is safely backed up. 32-bit recording on the transmitters allows the recorded audio to be recovered in post-production, even if the level was too loud or too quiet. Each transmitter allows recording of over 40 hours from the internal or external microphone - useful if the wireless signal has dropout so that the original audio is not lost.

Rode Wireless PRO system consists of 2x transmitters and 1x receiver, however it includes a smart charging case, pair of lavalier microphones, windshields, magnetic clips and cables for connection to external devices. Each transmitter picks up audio via its built-in microphone, or by way of external microphone such as the included Rode Lavalier II microphones. External microphones are connected via a locking 3.5mm jack connector. The receiving unit, which receives signals from both transmitters can be connected to a camera, smartphone, computer or other recording device either via USB or its 3.5mm jack audio output. GainAssist technology automatically controls the microphone levels to ensure they are perfectly balanced. Note: GainAssist does not apply to on-board recordings.

The Wireless PRO receiver features an LCD display that shows you critical information including audio levels, connectivity, and recording status. System settings can also be controlled via the receivers menus and left/right navigation buttons, either with a short-press (less than 1 second) or long-press (1 second or more). Three buttons allows the use to operate functions depending on which screen is displayed, corresponding to the on-screen symbols.

The receiver and transmitters each contain a rechargeable lithium-ion battery capable of up to 7 hours of use when fully charged. They can be charged independently using their respective USB-C ports and connected computer or other USB charging device, or they can be charged simultaneously using the included smart charging case. The charge case can store more than two full recharges for the whole system.

Wireless PRO is capable of recording three different audio sources at the same time - two transmitters, and a receiver mic. The receiver outputs a stereo signal from both its USB-C and 3.5mm connections, resulting in two audio channels. These channels can be routed to the output in a number of different ways, but by default Merged mode is selected. In Merged mode, the two transmitters and receiver microphone, if it is being used are combined into a single summed output. This is useful for live presentation setup, or only using one transmitter and want the audio to be recorded onto both channels of your recording device. Other modes include Split mode - where each transmitter's output is recorded onto separate left/right channel, allowing individual processing in post production; and Safety mode - where the Wireless PRO will also output a second channel of audio -10dB lower than the main channel, useful for reducing the risk of clipping. When Safety mode is activated, all inputs from transmitters and receiver microphone are be merged to the left channel and the safety channel will be output to the right channel.

Polar pattern: Omnidirectional. Frequency response: 20Hz - 20kHz. Maximum SPL: 123.5dB SPL. Equivalent noise: 22dBA, A-weighted. Signal to noise: 72dB. Transmission range: 260m (line of sight). Battery type: Lithium-ion. Operating time: Up to 7hours. Charge case battery capacity: 4200mAH. Power requirements: 5V, 3A via USB type-C. Charge time: 2.5hours. Dimensions (WxHxL): 44 x 46.5 x 20mm, transmitter/receiver; 101 x 70 x 82mm, charge case. Weight: 35g, transmitter; 36g, receiver; 177g, charge case; 284g, total.

Included accessories: 2x Wireless Pro transmitters, 1x Wireless Pro receiver, 1x Charge Case PRO, 1x SC2 ​3.5mm TRS to TRS cable, 1× SC21 USB-C to Lightning cable, 1x SC22 USB-C to C cable, 1x USB-C to C superspeed cable, 2x MagClip GO, 3x Furry, 2x Lavalier II ​microphones, 2x Pop Filter for lavalier, 2x Mic Clip lavalier, 2x Mini Furry lavalier, 1x Accessory Case, 1x Lens Cloth.
Optional accessories: Interview GO, DCS-1.

Wireless GO II Series

Wireless GO II from Rode has been designed as a compact solution for presenters or newsgatherers whereby a quick setup and ‘broadcast-grade’ audio is required.


Wireless GO II

Rode Wireless GO II shares much of the functionality, and uses the same form factor as the Wireless GO system, however the receiver allows the wireless connection of two transmitters. Operating in the 2.4GHz band, with an extended (compared to Wireless GO) 200m line of sight range, and with 128-bit encryption, Wireless GO II also allows the user to record up ‘over 24 hours’ of audio onto the internal memory, with the option to record each channel separately or combine them.

The dual receiver has a display that shows information including incoming audio per channel, reception quality, battery life, volume and recording status, whilst a 3.5mm TRS output allows analogue audio connection, whilst USB-C allows for iOS digital output. The internal rechargeable Lithium-ion battery can be charged via 5V, 0.3A USB.

Frequency range: 50Hz to 20kHz. Maximum input level: -20dBV, 3.5mm input. Maximum SPL: 100dB SPL, 1m, microphone. Transmission range: 200m, line of sight. Dimensions (WxHxL): 45.3 x 18.3 x 44mm, transmitter; 45.5 x 18.3 x 44mm, receiver. Weight: 30g, transmitter; 32g, receiver.

Included accessories: 3x SC20 USB-C to USB-A cables, 1x SC5 TRS to TRS memory cable, 3x furry windshields, 1x carry pouch bag.
Optional accessories: WIRELESS GO II TX single transmitter only, CHARGE CASE for 3x Wireless GO.


Wireless GO II Single

This system has the same functionality as Wireless Go II, however it is delivered with 1x transmitter, 1x receiver, 2x fur windshields, 2x USB-C cables, 1x SC5 3.5mm TRS jack cable, and 1x carry pouch.


Lavalier GO

Available in black or white, Lavalier GO has been designed with a 3.5mm TRS jack termination, to pair with the Rode Wireless GO system, however it will work with most other devices with the same input connection. The 4.5mm capsule is omnidirectional and allows the user to extend on the range of the Wireless GO’s internal microphone and give better positioning. An included foam windshield minimises wind noise and plosives, along with adding scratch protection to the microphone. Between the microphone capsule and 3.5mm jack termination, a 1.2m Kevlar reinforced cable reduces the risk of damage whilst in use or in transit.

Frequency range: 20Hz to 20kHz. Output impedance: 3kohms, typical. Maximum SPL: 110dB. Sensitivity: -35dB.

Wireless ME Series


Wireless ME

Rode Wireless ME is an ‘ultra-compact’ wireless microphone system designed for entry-level users.

The single channel, plug-and-play system is auto-paired out of the box, making it quick and easy to set up. Rode’s GainAssist technology automatically controls audio levels for compatibility with camera, smartphone, or computer. Both transmitter and receiver have built in microphones and in addition the transmitter has a 3.5mm jack microphone input for use with compatible microphones including the Rode Lavalier Go lapel microphone.

Transmission is via digital 2.4GHz for up to 200m line of sight range, and 128-bit encryption is used to prevent crosstalk.

Included accessories: 1x SC21 USB-C to Lightning cable, 1x SC22 USB-C to USB-C cable, 1x SC2 3.5mm TRS to TRS cable, 1x SC7 3.5mm TRS to TRRS cable, 2x furry windshields, and a carry pouch
Optional accessories: WIRELESS ME TX single transmitter only.

Dimensions (WxHxL): 44 x 45.3 x 18.3mm, transmitter/receiver. Weight: 32g transmitter/receiver.

RODELink Series

RODELink digital wireless system is compact, lightweight, and durable, and suited to a wide range of applications including ENG and EFP used with compatible handheld camcorders and DSLRs.

The hardware utilises 2.4GHz digital transmission with 128-bit encryption and through constant monitoring can switch between frequencies to retain the strongest RF signal available. In optimum conditions the system can operate up to 100m.

System performance:
Dynamic range: 112dB. Range: 100m, in optimal environments. Frequency response: 35Hz-22kHz. Maximum output level: 1V RMS. Maximum input signal level: 1V RMS. Maximum latency: 4ms.

These wireless products operate on the license-exempt 2.4GHz frequency band.


RX-CAM Receiver - On camera

This has a mounting foot, which can be located in one of two positions, to fit the accessory shoe of a video camera or DSLR. It also has a 3/8 inch thread for alternative fixings and a belt clip. Powered by 2x AA alkaline batteries or via a micro USB input (when connected to compatible equipment), it has an internal antenna. A bright OLED display shows the level, battery status for both transmitter and receiver, mute and channel selection status. The display is positioned on the rear of the receiver and is therefore easily visible to camera operators. The 3-pole, 3.5mm jack output is wired dual mono with an output impedance of 300ohms. Dimensions: 52 x 65 x 111(HxWxD) mm. Weight: 190g.


TX-M2 Transmitter - Handheld

A handheld transmitter with Rode’s M2 condenser capsule. The super-cardioid capsule has a frequency response of 35Hz to 20kHz with a dynamic range of 118dB and a maximum input signal level of 140dB SPL. The microphone can be powered for up to 10 hours by a single 4.2v LB1 lithium battery which can be recharged in situ using the included Micro USB cable, or powered up to 6 hours using 2x AA batteries. A mute switch located on the upper part of the microphone shaft allows the user to determine if audio is being transmitted when the power is on. Dimensions: 256 x 40 x 40 (HxWxD) mm. Weight: 222g.

Included accessories: ZP2 zippered pouch, Micro USB cable, LB1 rechargeable Lithium battery, mic clip.

Accessories


Interview GO - Handheld adapter

A handheld adaptor for the Wireless GO transmitter. It allows the mounting of the transmitter via the cold shoe clip so that the user can employ as tradition interview microphone. An included foam windshield reduced wind noise and vocal plosives. Dimensions (WxHxDia.): 42.9 x 237 x 23mm, adaptor; 73.3 x 81.6 x 73.3mm, windshield. Weight: 84g, adaptor; 8g, windshield.


Charge Case

Rode Charge Case is a handy charging case for the Wireless GO II. The charger can accommodate both transmitters and receiver, whilst the integrated battery facilitates two full re-charges for extended use. Charging status LEDs allow the user to see the status at a glance, whilst the case can be secured with zipper for protection in transit or storage.

Battery capacity: 4200mAH. Power requirements: 5V, 3A. Charging time: Approximately 2hours. Charge current: 3A, maximum. Dimensions (LxWxH): 78 x 98 x 71mm. Weight: 175g.


FlexClip GO

A set of three clips for the Wireless GO and Wireless GO II, including 1x MagClip GO, 1x CrossClip, and 1x VampireClip.


MagClip GO

A useful clip with magnet that allows the discreet positioning of the Wireless GO or Wireless GO II transmitter.


DCS-1 - Cold shoe mount

A dual cold shoe mount that gives the option of mounting a Wireless GO receiver and an on-camera microphone onto the cold shoe of the camera. The mount is manufactured from aluminium and includes a cable management slot for the optional SC11 cable.

Compatible with Rode products including Wireless GO, VideoMic NTG, VideoMicro, VideoMic, VideoMic Pro, VideoMic Pro+, VideoMic GO, Stereo VideoMic, Stereo VideoMic Pro, and Stereo VideoMic X. Dimensions (WxHxD): 92 x 22 x 21mm. Weight: 42.7g.


Colors 2 - Identification tags

A set of coloured tags to add to the Wireless GO or Wireless GO II system. The kit includes 4x windshields, 4x 3.5mm jack rings, 4x transmitter/receiver tags, and a sticker sheet. All items cover pink, green, blue, and orange.


SC11 - Cable

A 275.5mm TRS splitter cable that allows two mono signals, from different sources, to be input into a single stereo signal. This is particularly useful when used in conjunction with DCS-1 mount and dual microphones, along with single recording source such as DSLR. The split cable is coloured red and black, with the red side recording to the right channel of the audio, and the black side recording to the left audio channel. These can then be mixed as mono sources in post. Weight: 12g.

  Description Price £
ex. VAT
Add to basket
Delivery
RODE WIRELESS PRO RADIOMIC SYSTEM Dual transmitters, clip-on, 32-bit float recording, 2.4GHz, black Black Stock code: 74-291
Available in 2‑3 working days Ordered on demand, available in 2‑3 working days. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£340.90
RODE WIRELESS GO II RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, black Black Stock code: 74-270
Available in 1‑2 weeks Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£194.80
RODE WIRELESS GO II RADIOMIC SYSTEM Dual transmitters, compact, clip-on, 2.4GHz, black Black Stock code: 74-273
3 in stock Need more?
£283.30
RODE WIRELESS GO II TX Transmitter only, compact, clip-on, 2.4GHz, black Black Stock code: 74-269
Available in 2‑3 working days Ordered on demand, available in 2‑3 working days. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£95.00
RODE WIRELESS ME TX Transmitter only, compact, clip-on, 2.4GHz, black Black Stock code: 74-281
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£70.83
RODE WIRELESS ME RADIOMIC SYSTEM Single transmitter, compact, clip-on, 2.4GHz, black Black Stock code: 74-280
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£132.50
RODE LAVALIER GO MICROPHONE Lavalier, omnidirectional, 3.5mm TRS jack, black Black Stock code: 74-2428
Available in 3‑5 working days Ordered on demand, available in 3‑5 working days. Need it sooner? Call us
£58.33
RODE LAVALIER GO MICROPHONE Lavalier, omnidirectional, 3.5mm TRS jack, white White Stock code: 74-2429
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£58.33
RODE INTERVIEW GO HANDHELD ADAPTOR For Wireless GO transmitter Stock code: 74-276
Available in 1‑2 weeks Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
£23.33
RODE FLEXCLIP GO CLIPS For Wireless GO II, includes MagClip GO, CrossClip GO, and VampireClip Stock code: 74-275
Available in 3‑5 working days Ordered on demand, available in 3‑5 working days. Need it sooner? Call us
£23.47
RODE MAGCLIP GO CLIP Magnetic, for Wireless GO transmitter Stock code: 74-277
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£15.00
RODE SC11 CABLE Dual TRS mono to single TRS stereo, 275.5mm Stock code: 74-279
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£14.17
RODE DCS-1 DUAL COLD SHOE MOUNT Stock code: 74-278
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£15.00
RODE COLORS 2 IDENTIFICATION TAGS For Wireless GO II and Lavalier GO, set of 4 colours Stock code: 74-274
Available in 2‑3 working days Ordered on demand, available in 2‑3 working days. Need it sooner? Call us
£12.50
RODE RODELINK RX-CAM RADIOMIC RECEIVER Digital, on-camera, 2.4GHz Stock code: 74-2443
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£137.50
RODE RODELINK LB1 BATTERY For TX-M2, Lithium, rechargeable Stock code: 74-2448
Available in 1‑2 weeks Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£41.67
RODE RS-1 BATTERY CHARGER DOCK For 2x LB1/TX-M2 Stock code: 74-2449
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
£80.00
RODE CHARGE CASE For 3x Wireless GO II Stock code: 74-2450
Available in 2‑3 weeks Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
Lithium-Ion battery: Express delivery services not available outside mainland GB.
£58.33