UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

5 December 2025

CANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IEC

Stock code
76-366
Brand
Canford
CANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IEC
CANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IECCANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IECCANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IECCANFORD DANTE POWERED DIECAST LOUDSPEAKER Freestanding, IEC

CANFORD POWERED DIECAST LOUDSPEAKER

Designed to fill the need for an economical, robust, powered loudspeaker. Uses include talkback, line listening, cue programme, office monitoring and even small PA applications. Available in two standard models, transformer balanced audio input or a single dual-channel Dante audio input.

Standard Powered Diecast: Audio input is transformer balanced via XLR 3 pin female connector on the rear panel.

Dante Enabled Powered Diecast: This is a development of the standard diecast loudspeakers. Two Dante channel inputs are available via an RJ45 connector on the rear panel. The Dante unit operates in two modes, selectable via a mode switch on the rear panel. Mode 1 allows each Dante channel to be individually selected and monitored. Mode 2 again allows each Dante channel to be individually selected but also enables a mix of both channels to be selected and monitored. Channel selection is via a push button switch on the front panel.

Two simple wall fixings are available: a 'U' bracket 76-428 permits flush wall fixing with restricted horizontal or vertical tilt adjustment, and a universal angle bracket 18-092 with horizontal adjustment also available (speaker can be mounted horizontally or vertically). Mic stand adapter enables units to mount on 3/8″ or 5/8″ thread microphone stands. Loudspeaker has M6 tapped insert in the top and base.

Units are also available in single or dual 19″ rackmount versions (3U), to provide convenient rackmount ‘check-listen’ facilities.

Technical Specification:
Enclosure: Aluminium diecast
Drive unit: 10cm, full range single cone
Frequency range: 90Hz–13kHz (amplifier section 40Hz–20kHz)
Max. output power (Amp): 10 watts at 0.2% THD, 13 watts at 3% THD
Input impedance: >20k ohms
Input sensitivity: 0dBu @ 10W output
Power: 220–240V AC
Dimensions: 181(h) x 114(w) x 105(d) mm (free standing unit)
3U(h) x 105(d) mm (19 inch rackmounting)
Weight: 2.5kg

Priced and sold singly.