SQN portable mixers are designed to provide the necessary functions when using professional microphones for location recording. Full brochures available on request.
A four-input stereo miniature mixer. Four main channels have XLR mic input, bass-cut switches, where mic powering, input attenuators, channel gain and rotary faders are on channels 1 and 2, whereas channels 3 and 4 can be switched between line level and mic level with reduced gain and attenuation. Channels 1 and 2 can also matrix MS into AB stereo. An aux monitor input is also provided.
The output section has a master fader, peak or VU meter (which can also show battery level), switchable limiter, internally adjustable tone inject, balanced main outputs on 5-pin XLR, with second balanced and unbalanced outputs on the same multiway connector as aux monitor return (for single cable connection to recorder/camcorder), and third output, unbalanced on 3.5mm jack.
Headphone monitoring (A or B gauge jack, adjustable level) is switchable between mixer output and aux input, with MS matrixing available for monitoring MS recordings in AB stereo mode. Built-in slate microphone, LED meter illumination and pre-fade listening on channel 4.
Powered by 6 AA alkaline batteries giving more than 10 hours continuous use, with four pole DC input (5–18V DC). All this is packed into a rugged compact housing and supplied complete with webbing shoulder-strap.
A five-input stereo miniature mixer in a tough, compact, aluminium housing. Five channels have XLR electronically-balanced mic/line input, 4-way mic powering, input attenuator, bass-cut switch and rotary fader. All channels (except 3) can be routed to their respective left, right or both centre (ch1 and 2, 4 and 5). Additionally channels 1 and 2 can be ganged for a stereo or M-S microphone (with or without decoding to A-B) and channel 2 has a phase-reversal switch. Channel 3 can be routed left, right or to a pan control. Balanced monitor returns and mix-bus inputs are also provided on multipin I/O connectors A and B respectively.
The output has a master gain fader, PPM or VU meters with battery level indication, switchable twin-mono or stereo limiter with peak indicators, internally adjustable tone-inject with selectable left-channel interrupt. Main outputs are on both XLR and multipin A, each separately-switchable mic/line (Mic and line signals are separately transformer-balanced and floating. Multipin I/O connector A is shared with the monitor return inputs for single-cable connection to recorder etc.). Subsidiary I/O connector B provides unbalanced stereo outputs of –10dBu and allows all five channels to be extracted in pre- or post-fader mode.
Headphone monitoring (A or B-gauge jack, adjustable level) has 6-way rotary selector for stereo, R, L, M-S (decoded), L-R and L+R, and pre-fade listening is selectable for channels 2, 3, 4 and 5 as well as mixer/aux selection. A slate-microphone is built-in, actuated by front-panel switch, and meters have LED illumination. The right channel meter has a suppressed-zero battery voltage scale, selected by a front panel push putton.
Powered by 8 AA size alkaline batteries giving more than 10 hours continuous use, with multi-function four-pole DC input (6–24V), providing battery charging and external powering, and “pass-through” powering with auto-reset fuse to feed an accessory connector (and hence powering radio-mic receivers etc. through mixer on/off switch). The mixer is supplied complete with webbing shoulder-strap and mating multipin connectors.
||Spare shoulder strap for all models
||Waterproof padded carrying bag for SQN-4S mini and accessories
||Waterproof padded carrying bag for SQN-5S series II and accessories
||Black cowhide carrying-case for SQN-5S series II
||Black cowhide carrying-case for SQN-2S, SQN-3M or SQN-4S mini
||Unpadded accessory pouch for attachment to SQN-3WB or SQN-4WB bag
||3m loom to interface SQN-2S, SQN-5S or SQN-4S series IV/IVe with Sony Betacam.
||Coiled loom (3.5/6.5m) to interface SQN-2S, SQN-5S or SQN-4S series IV/IVe with Sony Betacam.
||Short coiled cable to feed SQN-5S or SQN-4S Series IV/IVe to 3.5mm stereo minijack