Prewired cables, ready for use. Intended for 12G 4K ultra high definition, 3G and 1.5G high definition, standard definition and analogue video applications. Manufactured using Canford SDV-L Low-loss digital video cable and 12G UHD BNC crimp connectors. Two different styles are available, Coax connectors 'Korus' 12G 4K UHD BNC connectors all fitted with black strain-relief bushes or Neutrik BNC 12G UHD rear-twist connectors.
Each individual cable is described in detail by the use of an abbreviated sequence in the form:
Canford Cable - 1st connector - 2nd connector - cable type - cable length - cable colour.
Detailed specifications for the connectors and cables are given in their appropriate entries elsewhere. Abbreviations used in the descriptions are as follows:
||-75 ohm BNC with strain relief (48-5063 COAX 'Korus' BNC 12G 4K UHD / 48-6376 Neutrik 12G UHD rear-twist)
||-36-520 CANFORD SDV-L CABLE Black
Note: This range of cables comes fitted with 100mm lengths of clear heat-shrink sleeving on the cable as standard, to enable fitting of labels by users.. The un-shrunk sleeve can easily be cut off if not required. Cable lengths and the number of sleeves is outlined below:-
|0.5 - 1m
|1.5 - 3m
|4 - 20m+
Manufactured by Canford.
'SDV' is a registered trademark of Canford Audio Limited.