Designed with ease of use, and efficiency in design in mind, this selected range of Point Source Audio earset microphones offers a discreet choice for broadcast, theatre, and film. All microphones below house microphone elements with option of omnidirectional or cardioid capsule. The microphones boom is bendable allowing the freedom to position for each talent.
CO-3 Omnidirectional
CO-3 is Point Source Audio's entry-level earworn microphone designed for speech reinforcement for church liturgy, lecturing, and other applications that require vocal pick up in a hands-free environment. It has an 5mm capsule with omnidirectional polar pattern which allows a full 360-degree pick up of sound providing 'a natural blend of voice and ambience'. The slim rigid boom has a fixed length and the ear-loop is designed to mount onto the left ear. Available in black or beige finish with fixed 3.5mm locking jack or TA4F termination.
Included accessories: 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Omnidirectional. Frequency response: 50Hz to 16kHz. Sensitivity: -44dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 116dB SPL. Output impedance: 1500ohms, at 1kHz. Cable length: 1.9m.
CO-6 Omnidirectional
CO-6 earworn microphone is designed for vocal reinforcement for church liturgy, aerobics instruction, lecturing, and other applications that require vocal pick up in a hands-free environment. CO-6's boom are, which Point Source Audio suggest is 'unbreakable' has been designed for mounting on left or right ear. In comparison to CO-3, CO-6 has a reduced sensitivity, greater frequency response, and higher maximum SPL. Available in beige finish only, and with fixed 3.5mm locking jack or TA4F termination.
Included accessories: 1x WSN windscreen, 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Omnidirectional. Frequency response: 40Hz to 17kHz. Sensitivity: -47dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 125dB SPL. Output impedance: 2000ohms, at 1kHz. Cable length: 1.9m.
Series8 microphones
Point Source Audio Series8 lavalier microphones include an interchangeable X-Connector termination type with compatibility for the most popular wireless microphone systems listed. For any other X-Connector type, please contact our Sales Team.
CO-8WS Omnidirectional
CO-8WS is a fully integrated, dual-ear mount earset microphone that provides the user with confidence in fitting and microphone placement. The microphone boom can be positioned above or below the ear, and the earhook on either left or right ear. With a maximum SPL of 136dB SPL and 4mm microphone element with omnidirectional pattern, CO-8WS allows a natural vocal sound well suited in low to moderate noise environments. The microphones is IP57 rated to protect against water, sweat, and makeup, and is available in black, beige or brown finish.
Included accessories: 1x Specified X-Connector, 1x WSN windscreen, 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Omnidirectional. Frequency response: 20Hz to 20kHz. Sensitivity: -43dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 136dB SPL. Output impedance: 1400ohms, at 1kHz. Cable length: 1.22m, excluding X-Connector.
CR-8S Cardioid
CR-8S is a cardioid earset microphone designed for applications when there is more than one microphone being used in close proximity. Often employed in live performances and in some recording situations where feedback may be an issue, the cardioid microphone picks up a focused sound from one direction compared to an omni that picks up from several directions. CR-8S is available in black, beige or brown finish.
Included accessories: 1x Specified X-Connector, 1x WSN windscreen, 1x B-Clip cable clip.
Element: Back electret condenser. Pattern: Cardioid. Frequency response: 160Hz to 14kHz. Sensitivity: -50dB 1V/Pa, +/-3dB at 1kHz. Maximum SPL: 135dB SPL. Output impedance: 1700ohms, at 1kHz. Cable length: 1.22m, excluding X-Connector.