UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

9 October 2024

SHURE WIRELESS SYSTEMS - ULX-D Series - Digital

31 items
SHURE WIRELESS SYSTEMS - ULX-D Series - Digital
SHURE WIRELESS SYSTEMS - ULX-D Series - Digital

Shure ULX-D series digital wireless systems have been designed for applications such a large conferencing events or campus installation where a higher density capacity is required. ULX-D is capable of operating up to sixty-three systems simultaneously within an 8MHz bandwidth. Along with the high density capability and Dante digital audio output capability, ULX-D also uses AES-256 encryption for security.

Frequency band: 606-67MHz (K51)

Usage Note: Licensing and legal use information for radiomic equipment in this product group is applicable to the UK only. Customers should check with the relevant regulatory body for the territory the equipment is to be used in prior to purchase to ensure appropriate legal usage and local environmental restrictions.

Receivers


ULXD4 Receiver ā€“ Single channel

One of three receivers in the ULX-D range, ULXD4 is a desktop, single channel receiver that can be mounted in a 1U, 19-inch format by using the included mounting bracket kit. The user can operate up to twenty-two compatible systems, in standard mode, or up to sixty-three compatible systems in high density mode ā€“ all within one 8MHz channel. Features such as over 120dB dynamic range and 24-bit/48kHz digital audio conversion, and interference detection and alert setup are included on the ULXD4 receiver. ā€˜Digital Predictive Switching Diversityā€™ aids smooth reception by silently switching to the best signal between receiving antenna, whilst the cleanest frequencies are automatically found, prioritised, and implemented when setting up a new channel.

The ULXD4ā€™s front facing panel has visual aids to monitor RF on both channels A and B, audio input including overload, and menu/parameter setup via an LCD panel. Power button, control knob, menu buttons, and gain up/down control buttons are also located on the front facing panel, along with an infrared port for syncing with selected transmitter.

The rear facing panel of the receiver houses all audio and data connectivity including BNC connectors for antenna A and B, 15V DC power supply input, Ethernet port with associated LED for status, and audio output on balanced 3-pin XLR with mic/line level selection via switch, or 6.35mm jack line level output. The Ethernet port allows connection to Shureā€™s Wireless Workbench software with compatible computer, whilst AMX and Crestron control system compatibility is also standard. Rack mounting fixing is provided to fit 19-inch racking.

Audio frequency response: 20-20kHz. Latency: less than 2.9ms. Dynamic range: greater than 120dB, analogue; 130dB, Dante digital. Audio output: balanced 3-pin XLR, -6dB, mic; +24dB, 3-pin XLR line; +18dB, 6.35mm line output. Networking: single port Ethernet 10/100Mbps. Network addressing: DHCP or manual IP address.


ULXD4D Receiver ā€“ Dual channel

ULXD4D has all the functionality and specifications as the ULXD4 receiver, however it is doubled in terms of channels and is powered via 100-240V AC via IEC power inlet. ULXD4D also has both primary and secondary network connections.

Dimensions (H x W x D): 44 x 482 x 274mm. Weight: 3.36kg, without antenna.


ULXD4Q Receiver ā€“ Quad channel

ULXD4Q has all the functionality and specifications as the ULXD4 receiver, however it is quadrupled in terms of channels and is powered via 100-240V AC via IEC power inlet. ULXD4Q also has both primary and secondary network connections.

Dimensions (H x W x D): 44 x 482 x 274mm. Weight: 3.45kg, without antenna.

Transmitters


ULXD2 Transmitter - Handheld

ULXD2 handheld transmitter is manufactured from metal for durability and offers interchangeable mic capsules including SM58, BETA58a, KSM8, BETA87a amongst others. This handheld transmitter is able to transmit a frequency range of 20Hz to 20kHz with flat response, however each mic capsule offers a different frequency response curve. Usage is up to nine hours continuous a single SB900-B lithium battery pack, or AA alkaline batteries can be employed as an alternative. External charging contacts on the base of the microphone allow the recharging of the SB900-B batteries whilst in situ when used with the compatible Shure SBC200-UK or SBC800-UK charging unit. Like the ULXD1, the ULXD2 offers an LCD screen that shows important information including group/channel and frequency. Lockout functions are accessible by navigating the user menu.

Operating range: 100m without barrier. Display: LCD. Power source: 2x AA alkaline batteries or single SB900-B lithium battery pack. Dimensions (D x L): 51 x 278/256mm Weight: 340/348g.

Shure microphone clamps are supplied as standard with a 5/8 inch thread. 5/8 inch to 3/8 inch adapters are available separately (stock code 53-217). Shure WA616M is a 5-pack of optional identification rings for the ULXD2.


ULXD1 Transmitter - Beltpack

Available with TA4F connector (74-5251) or 3-pin LEMO connector (74-5252), ULXD1 is manufactured from metal and has many of the features the handheld ULXD2 transmitter offers. ULXD1 has a detachable quarter-wave antenna and TA4F/LEMO3 connector for use with optional WA302, WA304, WA310, cables, WA360 in-line audio mute switch, or compatible lavalier microphones. ULXD1 has charging contacts for docking and charging with optional SBC200-UK or SBC800-UK battery charger, and can be powered using either 2x AA battery cells or a single SB900-B rechargeable lithium battery pack.

Operating range: 100m without barrier. Display: LCD. Power source: 2x AA lithium/alkaline batteries. Battery life: 9h, alkaline/lithium-ion. Dimensions (H x W x D): 86 x 66 x 23mm. Weight: 142g.

A range of compatible lavalier, miniature, and headworn microphones are available. See SHURE MICROPHONES - Miniature or see SHURE MICROPHONES - Headworn


ULXD6 Transmitter ā€“ Boundary microphone transmitter

ULXD6 is available in white or black variety, with cardioid or omnidirectional patterns, and is AES 256-bit encrypted boundary microphone for use with the ULXD4/ULXD4D/ULXD4Q receiver. ULXD6 is also compatible with Shureā€™s QLX-D series of receivers and is a handy addition to conferencing or lecture theatre setups.

A configurable mute button allows the user to switch between toggle, push-to-mute, push-to-talk, or disabled modes, with an LED showing status. The power on/off button is located on the underside of the microphone unit, whilst both infrared port and charging connector are located on the rear facing panel. Finally, a battery power status LED illuminates amber when a battery is missing or not inserted correctly; green when the microphone is docked on a compatible charging station; red when the battery has less than 30minutes charge remaining; and off when the battery has more than 30minutes charge remaining. When using AA alkaline batteries, runtime is estimated at up to 8hrs 40mins; whilst with the SB900-B lithium-ion battery, run time is up to 9hrs 20mins. Using an SB900-B battery also gives the ability to remotely monitor battery health, status, and runtime.

SBC250, SBC450 and SBC850 charging bays are compatible with multiple ULXD6 boundary microphone transmitters.

Power: 1/10/20mW. Gain adjustment range: 0-21dB, in 3dB steps. Dimensions (H x W x D): 113.94 x 61.83 x 34.28mm. Weight: 241g, including AA batteries.


ULXD8 Transmitter ā€“ Gooseneck base transmitter

ULXD8 has the same functionality as the ULXD6 microphone, however it is designed for desktop use and therefore in place of the microphone is a 6-pin microphone input for connection to a compatible Shure MX 405, 410, or 415 gooseneck microphone.

When using AA alkaline batteries, runtime is estimated at up to 8hrs 20mins; whilst with the SB900-B lithium-ion battery, run time is up to 9hrs. Using an SB900-B battery also gives the ability to remotely monitor battery health, status, and runtime.

ULXD8 is also available in black or white versions.

SBC250, SBC450 and SBC850 charging bays are compatible with multiple ULXD8 boundary microphone transmitters.

Power: 1/10/20mW. Gain adjustment range: 0-21dB, in 3dB steps. Dimensions (H x W x D): 136.94 x 78.27 x 40.77mm. Weight: 293g, including AA batteries.

Description Price $
ex. VAT
Add to basket
Delivery
SHURE ULXD1 RADIOMIC TRANSMITTER Bodypack, TA4F connector, K51 606-670MHz Stock code: 74-5251
Ordered on demand, available in 1‑2 weeks. Need it sooner? Call us
$649.90
SHURE ULXD1LEMO3 RADIOMIC TRANSMITTER Bodypack, LEMO3 connector, K51 606-670MHz Stock code: 74-5252
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$723.60
SHURE ULXD2/B58 RADIOMIC TRANSMITTER Handheld, Beta 58a, cardioid, dynamic, K51 606-670MHz Stock code: 74-5253
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$804.00
SHURE ULXD2/B87A RADIOMIC TRANSMITTER Handheld, Beta 87a, supercardioid, condenser, K51 606-670MHz Stock code: 74-5254
Ordered on demand, available in 1‑2 working days. Need it sooner? Call us
$911.20
SHURE ULXD2/B87C RADIOMIC TRANSMITTER Handheld, Beta 87c, cardioid, condenser, K51 606-670MHz Stock code: 74-5255
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$911.20
SHURE ULXD2/K8B RADIOMIC TRANSMITTER Handheld, KSM8, cardioid, Dualdyne, K51 606-670MHz, black Black Stock code: 74-5256
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,206.00
SHURE ULXD2/K8N RADIOMIC TRANSMITTER Handheld, KSM8, cardioid, Dualdyne, K51 606-670MHz, nickel Nickel Stock code: 74-5257
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,206.00
SHURE ULXD2/KSM9 RADIOMIC TRANSMITTER Handheld, KSM9, cardi/supercardi, condenser, K51 606-670MHz Stock code: 74-5258
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,380.20
SHURE ULXD2/KSM9HS RADIOMIC TRANSMITTER Handheld, KSM9, sub/hypercardi, condenser, K51 606-670MHz Stock code: 74-5259
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,380.20
SHURE ULXD2/SM58 RADIOMIC TRANSMITTER Handheld, SM58, cardioid, dynamic, K51 606-670MHz Stock code: 74-5261
Ordered on demand, available in 1‑2 working days. Need it sooner? Call us
$750.40
SHURE ULXD2/SM86 RADIOMIC TRANSMITTER Handheld, SM86, cardioid, condenser, K51 606-670MHz Stock code: 74-5262
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$804.00
SHURE ULXD2/SM87 RADIOMIC TRANSMITTER Handheld, SM87, supercardioid, condenser, K51 606-670MHz Stock code: 74-5263
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$857.60
SHURE ULXD6/C RADIOMIC TRANSMITTER Boundary, cardioid, K51 606-670MHz, black Black Stock code: 74-5264
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$696.80
SHURE ULXD6/O RADIOMIC TRANSMITTER Boundary, omnidirectional, K51 606-670MHz, black Black Stock code: 74-5265
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$696.80
SHURE ULXD6W/C RADIOMIC TRANSMITTER Boundary, cardioid, K51 606-670MHz, white White Stock code: 74-5266
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$696.80
SHURE ULXD6W/O RADIOMIC TRANSMITTER Boundary, omnidirectional, K51 606-670MHz, white White Stock code: 74-5267
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$696.80
SHURE ULXD8 RADIOMIC TRANSMITTER Gooseneck base, K51 606-670MHz, black Black Stock code: 74-5268
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$636.50
SHURE ULXD8W RADIOMIC TRANSMITTER Gooseneck base, K51 606-670MHz, white White Stock code: 74-5269
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$636.50
SHURE ULXD4UK RADIOMIC RECEIVER Fixed, digital, single channel, predictive switching, K51 606-670MHz Stock code: 74-5271
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,293.10
SHURE ULXD4DUK RADIOMIC RECEIVER Fixed, digital, dual-channel, predictive switching, K51 606-670MHz Stock code: 74-5272
Ordered on demand, cancellations may incur charges, available in 1‑2 working days. Need it sooner? Call us
$3,685.00
SHURE ULXD4QUK RADIOMIC RECEIVER Fixed, digital, quad-channel, predictive switching, K51 606-670MHz Stock code: 74-5273
Ordered on demand, cancellations may incur charges, available in 4‑6 weeks. Need it sooner? Call us
$7,383.40
SHURE SBRC-UK BATTERY CHARGER Rackmount, compatible with SBC-AX module Stock code: 74-5297
Ordered on demand, cancellations may incur charges, available in Call.
$924.60
SHURE SBC-AX BATTERY CHARGER module, for SBRC-UK, compatible with SB900-A Stock code: 74-5298
Ordered on demand, available in Call.
$140.70
SHURE SBC450 CHARGING DOCK For 4x ULXD6/ULXD8 transmitters Stock code: 74-5343
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$924.60
SHURE SBC850 CHARGING DOCK For 8x ULXD6/ULXD8 transmitters Stock code: 74-5344
Ordered on demand, available in 4‑6 weeks. Need it sooner? Call us
$1,286.40
SHURE SBC250-UK BATTERY CHARGER For 2x ULX6/ULX8 Stock code: 74-5874
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
$536.00
SHURE SBC200-UK BATTERY CHARGER For 2x SB900 transmitter/receiver batteries, with PS60UK PSU Stock code: 74-5876
Ordered on demand, cancellations may incur charges, available in 2‑3 working days. Need it sooner? Call us
$348.40
SHURE SBC800-UK BATTERY CHARGER For 8x SB900 transmitter/receiver batteries, with PS60UK PSU Stock code: 74-5877
Ordered on demand, cancellations may incur charges, available in Call.
$616.40
SHURE SB900-A BATTERY For ULX-D, QLX-D, UR5, P3RA, P9R, P10R, Lithium-Ion, rechargeable Stock code: 74-5878
No longer manufactured. See the product page for suggested alternatives.
SHURE SB900-B BATTERY For ULX-D, QLX-D, AD3, P3RA, P9RA, P10R+, Lithium-Ion, rechargeable Stock code: 74-5879
Ordered on demand, available in 1‑2 working days. Need it sooner? Call us
Hazardous: Only available for shipping to GB mainland addresses.
$109.88
per pack
SHURE WA616M ID RINGS For ULX-D/QLX-D handheld transmitters, pack of 5 Stock code: 74-5869
Ordered on demand, available in 2‑3 weeks. Need it sooner? Call us
$26.80