UK Sales: 0191 418 1122 International: +44 191 418 1133
Many pieces of equipment have two input connectors – a 3 pin XLR, low impedance balanced, often for microphones, and a 2 or 3 pole 6.35mm jack, usually high impedance unbalanced…
These second-generation, XLR / jack hybrid panel-mount connectors combine a 3-pole XLR female and 6.35mm 3-pole (stereo) jack socket in one XLR plastic housing, to give a…
A range of connectors, switches and cable glands mounted on insulating mouldings which fit the Neutrik ‘D’ series cut-out. Suitable for use with Canford Universal Connection…
Double-sided ('back-to-back') 3.5mm 3-pole socket.Mounting hole diameter 9.0mm, flange diameter 12.0mm. Maximum panel thickness 5.0mm. Can also be used as an in-line coupler.
3.5mm miniature jack sockets, 2-pole and 3-pole, mounted in metal housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with…
These solder connection and horizontal PCB mounting panel mount 6.35mm jacks offer a wide variety of combinations of contacts and mounting options. They are available in mono and…
6.35mm PC mounting jack sockets, available in four versions. Separation of the mechanical latch and electrical contacts means that a high retention force can be achieved togeter…
NJ6TB-V 3 pole, 6.35mm PC-mounting jack sockets, all contacts switched ('normalled'). Separation of the mechanical latch and electrical contacts means that a high retention force…
These horizontal PCB mounting, panel-mount, 6.35mm jacks offer high packing-density by mounting on 15.88mm minimum centres in rows or arrays. They are available in mono and stereo…
3 pole B-gauge 6.35mm and Bantam type 4.4mm panel mounting sockets with gold plated contacts. Solder lug connection. Panel mounting hole 9.5mm (B-gauge) or 7.14mm (Bantam type).
3-pole jack sockets in panel mounted or in-line versions. Panel mount type can be front or reverse mounted (the latch bar must be removed if reverse mounted) in a 24mm cutout…
Industry standard long-frame B-gauge and bantam (4.4mm) jack sockets. Frames are zinc plated and clear passivated mild steel, with polished brass sleeve. Bantam types have closed…
The Neutrik ‘Speakon’ loudspeaker/amplifier connectors are used extensively by amplifier and loudspeaker manufacturers as their standard connector. These special panel-mount…
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
