K&M

Product groups

• Filter

  28 of 28

  Show new products only

  • New (3)

  Category

  • Cleaners, lubricants and screens (1)(1)
  • Studio trolleys and other racking (2)(0)
  • Studio storage (1)(0)
  • Equipment table, wall and ceiling mounts (3)(1)
  • Equipment and music stands (10)(1)
  • Microphone arms and goosenecks (2)(0)
  • Microphone stands and accessories (7)(0)
  • Stand spares (1)(0)
  • Fishpoles, booms and reflectors (1)(0)
• New

  K&M PROTECTIVE SHIELDS

  2

  A range of K&M protective shields designed preliminarily for protection against infection within orchestras and choirs, however also useful for noise reduction within similar…

• 

  K&M 19 INCH RACK TROLLEYS

  4

  42020 Adjustable trolley, welded steel construction, nylon dipped finish, black. Four castors, front two lockable. 12U rack space in top section, angle adjustable up to 45° tilt…

• 

  K&M 19 INCH DESK RACK

  1

  8U 19-inch low-cost, angled, rack desk-stand. Sturdy ‘U’ profile, with steel rack rails, supplied complete with 16 cage nuts and bolts. Height 445mm, desk footprint 440mm ×…

• 

  K&M HEADPHONE HOLDERS

  8

  These accessories are designed to store up to two sets of 'standard' overhead style headphones and additional in-ear style headphones. Depending on the model, they can be mounted…

• New

  K&M MONITOR MOUNTS

  6

  This range of video monitor supports from K&M that complements their long established range of microphone stands and accessories. The mounts are designed with VESA…

• 

  K&M LOUDSPEAKER STANDS - Wall, ceiling mounts

  19

  Suited to supporting small, medium and large loudspeakers up to 50kg, this range from K&M includes solutions for both wall and ceiling mount applications. Manufactured in…

• 

  K&M LOUDSPEAKER STANDS - Ceiling mounts

  2

  These steel mounts fix to the ceiling via a bracket with cover plate; a fixed stem allows internal cable management. Both swivel and tilt adjustments to the speaker are available…

• 

  K&M HYGIENE SUPPORT STANDS

  18

  K&M (König & Meyer) offer a range of disinfectant stands, including floor standing, wall fixings, and table top stands. These stands have been designed specifically for…

• 

  K&M LAPTOP AND MULTIMEDIA STANDS

  9

  K&M’s range of laptop and multimedia stands have been designed to suit the increasing market for portable device mounting hardware. The following laptop stands can be used as…

• 

  K&M TABLET AND SMARTPHONE HOLDERS

  18

  These holders mount smartphone or tablet devices so that they are easily reached, whether in the studio, office, home, or on stage. They adjust to suit a wide range of models and…

• 

  K&M MUSIC OR SCRIPT STANDS

  7

  K&M’s range of music or script stands have been designed to suit educational, orchestral, and theatrical environments, along with commercial use in seminars. 11505 Music…

• 

  K&M MONITOR LOUDSPEAKER STANDS

  9

  K&M (König & Meyer) offer a range of stable, steel, floor-mounting stands for monitor loudspeakers complementing the existing range of loudspeaker stands. All floor…

• 

  K&M LOUDSPEAKER STANDS - Floor stands

  19

  This range of loudspeaker floor stands from K&M complements their long established microphone stands. All models are manufactured in steel with a black finish and supplied…

• 

  K&M LOUDSPEAKER STANDS - Distance rods

  9

  This range of K&M distance rods, designed to mount loudspeakers above a subwoofer. All models are manufactured in steel with a black finish and supplied with 35mm diameter…

• 

  K&M LOUDSPEAKER STANDS - Accessories

  38

  A comprehensive range of accessories to complement K&M loudspeaker stands and mounts. All accessories are finished in black unless otherwise stated. Safety Collars and…

• 

  K&M MIXER STANDS

  2

  These stands from K&M compliments their long established range of live and studio stands. All models may be folded and are finished in black. 28075 Designed to hold smaller…

• New

  K&M CAMERA STANDS

  4

  A selection of K&M stands designed for the support of camera, webcam, projector, or portable recording device. 19781 Desktop, round base 19781 has a cast-iron, 130mm round…

• 

  K&M GOOSENECK TABLE BASE

  5

  Two designs of bases for direct mounting of goosenecks, featuring XLR 3-pin female input connectors on the top and XLR 3-pin male output connectors on the rear. 2937 Series A…

• 

  K&M MICROPHONE DESK ARMS

  5

  This range of K&M adjustable mic-arms have been designed to increase ergonomics within a studio or workstation set up. 258 Microphone Arm - Table mount Table microphone arm…

• 

  K&M MICROPHONE STANDS - Table stands

  12

  A range of table standing microphone stands and bases. Unless otherwise indicated, all types have nickel-plated tube sections, with 3/8" threads for microphone clamps. Bases of…

• 

  K&M MICROPHONE STANDS - Floor stands

  27

  This well-known and respected range of microphone floor stands are imported directly by Canford. Unless otherwise indicated, all types have nickel-plated tube sections, with…

• 

  K&M MICROPHONE STANDS - Floor stands with booms

  26

  This well-known and respected range of microphone floor stands are imported directly by Canford. Unless otherwise indicated, all types have nickel-plated tube sections, with 3/8"…

• 

  K&M MICROPHONE STANDS - Boom arms

  11

  This range of single-piece and telescopic, microphone boom arms are designed to work with K&M microphone stands. Unless otherwise stated all types have steel tube sections…

• 

  K&M MICROPHONE STANDS - Ceiling mount

  2

  These ceiling-mounting, extendable, microphone supports offers a solution to the mounting of microphones to a ceiling. 22150 - 610-1120mm range In two parts, the steel…

• 

  K&M MICROPHONE STANDS - Accessories

  34

  A comprehensive range of accessories to complement K&M Microphone Stands and Boom Arms. Quick Release Adapters 23900 Quick Release Adapter A quick release adapter…

• 

  K&M INSTRUMENT AND UTILITY TRAYS

  3

  12225 Instrument Tray - 250x330mm Steel instrument tray with usable shelf dimensions of 250x330mm. The shelf has a lip on all sides to prevent spillages, a foam insert to absorb…

• 

  K&M SPARE PARTS

  88

  A comprehensive range of spare parts for the K&M range of microphone, music, loudspeaker and equipment stands, marketed in the UK by Canford Audio, Beyer, AKG and others…

• 

  K&M BOOM POLES (FISHPOLES) - Aluminium

  6

  K&M boom poles (fishpoles) have been designed to aid sound recordists with longer reaches, often associated with on-set TV or film overhead recording. 23755 3-section…