UK Sales: 0191 418 1122         International: +44 191 418 1133

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

SONIFEX TELEPHONE BALANCE UNITS

These telephone balance units automatically compensate for variable line resistance and reactance whilst the line is connected. All units in the range are fully approved by BABT with “green dot” approval S/3619/23/L/501792 and are compliant with European PTT specifications.

HY-03

Sonifex HY-03 telephone hybrid is the replacement for the HY-02, which for many years has set the standard as an excellent value, high quality telephone hybrid. As well as other extra features the HY-03 also includes a ringing detector as standard. When using the HY-03 the telephone line is isolated from the equipment by a disconnection barrier and an approved line transformer, and may be switched between a local handset and the equipment by means of an illuminated “LINE CONNECT” switch which also serves as an “ON” and “RING” indicator. When switched to “LINE CONNECT” the equipment holds the telephone call. This switch function can be operated remotely.

HY-03 may be used with 0dBu clean feed input signals, or alternatively, direct connection of a microphone input, which is adjustable between 74db to 40dB on a rear preset adjustment, may be used. The balanced clean feed input has a bandpass filter, and is limited to give peak levels of +4dBu at the telephone line. The output circuitry processes the telephone signal to give 0dBu output from the equipment, and then balances or rejects the clean feed signal automatically under varying line conditions. The rejection is constantly reviewed during the presence of clean feed signals to optimise the equipment for prevailing line conditions. The telephone signal is processed through a bandpass filter and noise gate which downward expands during no signal conditions to eliminate line cross talk and associated noise.

The output is a 3-pin male XLR connector with a nominal level of 0dBu balanced low impedance. The level is adjustable between +8db to -14dB on a rear preset adjustment. The output can also be set as a mix of the caller and mic/line input signals to allow a recording of both sides of a telephone conversation.

The included ringing detector allows the HY-03 to auto answer incoming calls. It can be pre-set to answer incoming calls on either the first ringing cadence through to the sixth ringing cadence. The “LINE CONNECT” switch is illuminated each time a ringing cadence is present, and an opto-coupler presents an active open collector output suitable for driving a white light indicator on the remote connection. The unit is fitted with K-break disconnection (UK use) as standard but an optional HY-03DTD board is available to equip the HY-03 for disconnection upon detecting dial-tone.

Dimensions (WxDxH): 218 x 44.45 x 175mm, HY-03; 483 x 44.45 x 175mm, HY-03S or T

Versions available:

HY-03 Free-standing balance unit
HY-03S Rack-mount single balance unit
HY-03T Rack-mount twin balance unit

Optional accessories: HY-03DTD, HY-03SCON, HY-03TCON, HY-03CON.

Ordering note: Standard models do not operate with the Broadcast Bionics PhoneBox system, a special version is required. Please contact Technical Support for details.

DHY-03

This digital version of the industry standard HY-03 uses Digital Signal Processing to give much enhanced performance over the more established types, for use where the best quality telephone interfacing is required, typically in broadcast phone-in and news/sport applications.

The send and receive paths are transformer balanced and isolated, and connect to the other equipment via XLR style connectors, with input and output gain controls for ±6dB adjustment. Independent LED bargraph metering of send and receive levels aids set-up, the illuminating “connect” or “divert” switch has remote control facilities, and K-break, reverse polarity and dial tone disconnect functions are provided for the phone line, which connects via and RJ11 socket for the line and for the telephone handset.

Analogue limiting, controlled by the DSP, prevents overload, whilst the unit automatically reacts to changing line conditions and programme content. The use of DSP increases the unwanted sideband rejection to 72dB (measured using tone, ref. 0dBu peak output), and offers full adaptive echo cancellation to 127msec default is set to 24msec.

Other features on this unit are built-in conferencing for 2 hybrids (using the optional DHY-03CONF conferencing cable), so that a single telco channel on a mixing desk can receive 2 calls, an integrated ring detector that can automatically answer calls after 2, 4 or 6 rings, DTMF tone detection to assist in studio automation and automatic “ducking” facility to allow the user to talk-over a caller by reducing the caller signal gain if the user level exceeds a threshold, allow the DHY-03 to take on many roles.

A Eurocard version of the DHY-03 is available, with a DIN 41612 connector, which requires an external BABT approved power supply. This offers similar electronic features as the cased units, but is not fitted with XLR connectors and controls, is without mic input and conference function and levels are shown on dual LEDs.

ETSI approval compliant with European PTT specifications (EC version is BABT approved for number S/3619/3/L/501782 only).

Dimensions (WxDxH): 218 x 45 x 175mm, DHY-03; 483 x 45 x 175mm, DHY-03S or T

Versions available:

DHY-03 Single unit, freestanding
DHY-03S Single unit, rackmounting
DHY-03T Twin unit, rackmounting
DHY-03EC Single unit, eurocard

Optional accessories: DHY-03SCON, DHY-03TCON, DHY-03CON.

Specifications:
HY-03 DHY-03
Input impedance, Line mode (clean feed) 10k ohm balanced 0dB 10k ohm balanced 0dB
Input impedance, Microphone mode 200ohms balanced 2kohms balanced
Clean feed limiting input +4dBu -4dBu
Bandwidth to telephone line, -3dB ref 1kHz 250Hz - 4kHz 250Hz - 4kHz
Output impedance 50ohms 50ohms
Output level range +8dB to -14dB +6dB, 0dB, -6dB
Rejection ratio 45dB on 1kHz tone 76dB on tones
Mic/line input connector 3-pin female XLR 3-pin female XLR
Line output connector 3-pin male XLR 3-pin male XLR
Telephone line connector RJ11 6/4 socket RJ11 6/4 socket
Telephone handset/instrument connector RJ11 6/4 socket RJ11 6/4 socket
Conference or record audio connector - RJ45 socket
Remotes connector 9-way D-type socket 9-way D-type socket
RS232 serial connector - 9-way D-type socket
Power source 230V 50Hz, or 115V 60Hz 90 to 250V, 47-63Hz
  Description Price (£) Add to basket
Show carriage
SONIFEX TELEPHONE BALANCE UNIT HY-03   Stock code: 28-311
Please login for stock availability and lead times.
£634.00
SONIFEX TELEPHONE BALANCE UNIT HY-03S   Stock code: 28-312
Please login for stock availability and lead times.
£644.00
SONIFEX TELEPHONE BALANCE UNIT HY-03T   Stock code: 28-313
Please login for stock availability and lead times.
£1,230.00
SONIFEX TELEPHONE BALANCE UNIT HY-03DTD Dial tone detect   Stock code: 28-314
Please login for stock availability and lead times.
£94.96
SONIFEX TELEPHONE BALANCE UNIT HY-03SCON Front panel conversion kit   Stock code: 28-315
Please login for stock availability and lead times.
£38.96
SONIFEX TELEPHONE BALANCE UNIT HY-03TCON Front panel converstion kit   Stock code: 28-316
Please login for stock availability and lead times.
£44.96
SONIFEX TELEPHONE BALANCE UNIT HY-03CON Front panel conversion kit   Stock code: 28-317
Please login for stock availability and lead times.
£32.96
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03   Stock code: 28-321
Please login for stock availability and lead times.
£984.00
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03S   Stock code: 28-322
Please login for stock availability and lead times.
£994.00
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03T   Stock code: 28-324
Please login for stock availability and lead times.
£1,930.00
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03EC   Stock code: 28-325
Please login for stock availability and lead times.
£604.00
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03CONF Conference cable to connect 2 x DHY03S   Stock code: 28-328
Please login for stock availability and lead times.
£31.96
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03SCON Front panel conv kit   Stock code: 28-326
Please login for stock availability and lead times.
£38.96
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03TCON Front panel conv kit   Stock code: 28-327
Please login for stock availability and lead times.
£44.96
SONIFEX DIGITAL TELEPHONE BALANCE UNIT DHY-03CON Front panel conversion kit   Stock code: 28-320
Please login for stock availability and lead times.
£35.96