These Category 6A compliant screened cables are made using Canford's CAT7-F extra-flexible deployable cable. They are fitted with Neutrik Ethercon NE8MX6-T connectors at each end. The extra-flexible PVC jacket and stranded conductors offer a flexibility normally only found in microphone cables and have a life far in excess of more common solid-conductor types.
Each individual cable is described in detail by the use of an abbreviated sequence in the form:
Canford Cable - 1st connector - 2nd connector - cable type - cable length - cable colour.
Detailed specifications for the connectors and cables are given in their appropriate entries elsewhere.
|NEUTRIK ETHERCON CAT6A CABLE CONNECTOR, for 0.85 - 1.1mm insulation, nickel 46-0603
|Canford CAT7-F cable 31-840
Note: This range of cables comes fitted with 100mm lengths of clear heat-shrink sleeving on the cable as standard, to enable fitting of labels by users. The un-shrunk sleeve can easily be cut off if not required. Cable lengths and the number of sleeves is outlined below:
|0.5 - 1m
|1.5 - 3m
|4 - 100m
Note: A range of Data cable drums with a variety of connector, cable and length combinations is now available, see CANFORD CABLE DRUMS - DATA - Plastic, rubber and metal drum, supplied with cables
Manufactured by Canford.