UK Sales: 0191 418 1122 International: +44 191 418 1133
A range of XLR cable connectors from Canford featuring nickel-plated zinc diecast shells, silver-plated contacts and a triple position strain relief design. Manufactured with a…
The Neutrik XX series is the successor to the 'industry standard' X series XLR cable connector, and offers several new features. It is available in 3, 4, 5, 6 and 7 pin…
The Neutrik XX series is the successor to the 'industry standard' X series XLR cable connector, and offers several new features. A version of the XX series for use with larger…
A version of the XX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The…
A version of the XX series for use when style is important, these have a sexy, velour, chromium-plated shell. They also differ from the main XX series in having an extra-high…
A version of the XX series designed specifically to give enhanced RF screening, for example in live performance, critical recording or where there are particular local problems…
The XX-HD series are heavy duty XLR cable connectors for outdoor use. The all metal design is dust and water protected to IP67 when mated with XX-HD cable connectors or MPR-HD…
The “industry standard” XLR cable connector, easy to assemble and check in the field, with only 4 parts and no screws. Contact block is fibreglass reinforced hard plastic…
Cable connectors with nickel plated shell and silver plated contacts. These use the same shell, strain-relief etc as the X-series, with insulation displacement connections (pins…
A version of the X series designed specifically for the transmission of digital signals. The female connector features a coaxial ground spring which gives an accurate connection…
Heavy-duty, environmentally protected FX and MX. The FX-HD has a diecast zinc shell and one piece neoprene jacket with sealing lips, to protect the shell and latch mechanism from…
The Neutrik True Outdoor Protection (TOP) series was designed for the increasing demands on interconnection systems. In particular, in harsh environment applications, where…
The Neutrik True outdoor protection (X1-TOP) series is the newest iteration of Neutrik's heavy duty XLR range, featuring a new boot design the TOP series developed for the…
FXS A modified version of the 3FX socket, this incorporates a rotary switch with positive click action, labelled “on” and “off”. “Off” position shorts pins 2 and…
The RX Series is the right angle version of the XX cable connector series. The successor to the RC series, they offer several new features which make it easier to assemble and to…
The ConvertCon is a 'unisex' 3-pin connector, that converts between male and female by sliding the housing along the body. It is designed for emergency applications, avoiding the…
A range of low profile, XLR cable connectors, designed for applications where a small size is critical. They feature a standard body with a rear plastic insert which pushes…
This range of low profile, cable XLRs from Switchcraft are known for their durability and ease of use. They are designed for applications where a small size and low weight are…
XLR cable connectors from Rean available in 3 and 5 pin configurations, with a latch locking design and ergonomic finger groove for handling convenience. Designed for long…
Right-angled XLR cable connectors from Rean available in 3 and 5 pin configurations with a latch locking system. Designed for long service having been tested for more than 1000…
Glands with flexible strain relief giving high protection to the cable against bending stresses. Glands supplied with connectors are black as standard, but are available in…
A range of XLR panel connectors from Canford featuring metal-bodied housing, conforming to Canford's Universal series sizing, dimensionally common to most Neutrik D-series…
Universal metal-bodied housing common to most Neutrik connector ranges allows simpler metalworking and more flexibility of use. Panel cutout 24mm, connector can be mounted front…
The new D-LX series is the next generation development from the long-established D-L series, and features a compact all metal housing with an ingenious duplex ground contact…
A version of the D-LX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The…
Similar to the D-L series, but with screw terminal connection in place of the solder cups. Cable range 0.128 sq.mm - 0.52 sq.mm. Black shell with gold-plated contacts. SCDR -…
Universal housing plastic shell connectors, without latch. Effectively these are plastic D-series connectors. Panel cutout 24mm, connector can be mounted front or rear of panel…
Plastic shell economically priced PCB mount connectors. Mounting holes compatible with D and G series. NC3FPRH With latch, gold plated…
Traditional style panel mount connectors. FP has 25mm panel cutout and latch which is pressed towards the panel to release. MP has 20mm panel cutout and both types are for…
Sealed male XLR panel connectors, specifically for use with Neutrik X-HD cable connectors to achieve a dust and water ingress sealing to IP65 rating. They have gold plated…
Plastic bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The A series…
These are a lower cost version of the Neutrik A series plastic-bodied XLR panel connectors from Neutrik. They have the smallest size and highest packing-density (23mm between…
Metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The B series offers…
FD-H and MD-H Universal metal-bodied housing series, for PCB mount applications. Designed for use where connector is mounted such that connector enters horizontally and PCB is…
These are a lower cost version of the Neutrik B series metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between…
These are special hybrid connectors which offer a cable style contact section mounted on a 'D' series mounting flange. They can be front or rear mounted, and have a black finish…
These feed-through 3-pin XLR adapters are mounted on a 'D' series mounting flange. NA3FDM has female contacts at the front and male at the rear, overall length 57mm. NA3MDF is…
Many pieces of equipment have two input connectors – a 3 pin XLR, low impedance balanced, often for microphones, and a 2 or 3 pole 6.35mm jack, usually high impedance unbalanced…
These second-generation, XLR / jack hybrid panel-mount connectors combine a 3-pole XLR female and 6.35mm 3-pole (stereo) jack socket in one XLR plastic housing, to give a…
The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are…
XLR panel connectors from Rean featuring metal-bodied housing, conforming to Canford's universal series sizing, dimensionally common to most Neutrik D-series connector ranges to…
These metal chassis mount connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC series…
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands supplied with connectors are black as standard, but are available with…
Colour coding rings are available to fit over the shell at the base of the gland, and are 6mm wide. They are suitable for use with standard 6mm wide labelling machine tapes. A…
A bench tool to press-fit the cable gland onto XX series XLR connectors.
Hand tools to aid assembly of the Neutrik XX series XLR connectors and X series jack plugs. They grip the gland securely, and enable it to be firmly tightened down onto the…
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands are black as standard, but are available in nine colours as…
Colour coding rings are available to fit over the shell at the base of the gland, and incorporate a flat area 10mm × 6mm which can be engraved or accommodate a label. They can…
These hinged covers are suitable for all Neutrik D-series and Canford ‘Universal’ series connectors, and seal them, when unmated, from dust and water ingress to IP42. There is a…
A two-part rectangular profile extruded case which enables custom adapters to be assembled. It accepts any D-series connector from Neutrik or Canford at each end. The two sections…
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
