UK Sales: 0191 4181122 International: +44 191 4181133
As a distributor of the Rycote brand, Canford stock a range of Rycote products including soft cases and bags; microphone clamps, suspensions and thread adapters; radiomic pouches, belts and brackets; windshields, windscreens and pop screens.
Rycote microphone protection cases protect and carry up to three microphones within telescopic, plastic tubes which fit into a lightweight PVC outer case covered with a…
A lightweight extension handle, fitted with a soft-feel foam grip, that enables the user to hand-hold simple microphone mounts.The handle has a 3/8 inch Whitworth male thread on…
The Hot Shoe Extension extends the accessory shoe of a camera so that multiple attachments can be fitted such as lights and additional microphones. Alternatively it can be used…
This simple bracket is used for mounting up to two wireless receivers onto camcorders or DSLR cameras. The bracket can be mounted on either the camera 1/4 inch mounting point, if…
Back-to-back clips to mount a second microphone parallel to the first, a clamp to hold an XLR connector in a fixed position on the end of a boom pole, a multi-position ball joint…
Undercovers, Overcovers and Stickies are Rycote's elegant solution to mounting personal microphones both under and over clothing. They are a universal product, suitable for most…
The InVision Broadcast microphone suspension range is aimed at isolating small to medium-length microphones from rumble and handling-noise where a discreet low profile is…
The InVision USM series studio mounts use Rycote’s patented ‘Lyre’ technology to suspend studio microphones safely, and isolate them from the low-frequency thumps and rumbles that…
These members of the InVision range are shock-mount and suspension systems for fitting microphones between 9.5 and 25mm in diameter and up to 300mm in length, depending on model…
Suitable for most solid-state hand-held portable recorders fitted with a female 1/4 inch tripod thread, this suspension offers 'excellent isolation from vibrations, shocks and…
These kits offer configurations to allow almost any microphone body, capsule or stereo pair, to be shock-mounted and provided with varying degrees of wind-shielding. 'Mono' types…
These products have been introduced recently; further information is being prepared and will be added in the near future. All Rycote products are available from Canford. If the…
These three kits from Rycote offer the user an all-in-one pack to accessorise a camera-mounted shotgun microphone - each kit catering for a different range of microphones. Each…
The Cylcone introduces advanced design concepts to the traditional basket windshield, using modern materials to create the successor to the Rycote designs familiar since the late…
This modular system can be configured to allow almost any microphone body, capsule or stereo pair, to be shock-mounted and provided with varying degrees of…
Now discontinued by Rycote, some parts of the S-series range are still available to purchase, whilst stocks last. For suitable replacement systems by Rycote, see "Windshields…
This range of non-modular windshields, based upon the Rycote wind-noise reduction system, is for use with shotgun and rifle microphones as used by film and TV professionals…
Unlike the familiar Rycote Modular Windshields, these designs slip onto the body of the microphone. They may be used on handheld or with 'Softie', 'InVision Studio' or 'InVision…
Similar to the full sized WindJammers, a familiar sight on TV, these are miniature ‘furry’ covers for protection against wind noise. ‘Mini’ versions fit separate microphones, as…
A range of non-modular, shock-mounts based upon Rycote's patented Lyre suspension system, for use with shotgun and rifle microphones as used by film and TV professionals. The…
Intended to provide an economical and effective protection against wind noise in high-wind conditions, this range of simple, lined, furry covers fit over popular handheld digital…
As might be imagined, this is a furry cover designed to be used on lavalier or clip mounted microphones, worn on the outside of clothing, to provide simple, effective protection…
Robust and practical two-part foam-cavity windshields, the Smoothies will give wind-noise reduction of up to 22dB. They are available in a large range of sizes to fit most popular…
These weatherproof covers protect the microphone windshield from the effects of rain. They are made of an open-cell foam, which diffuses the sound of falling rain drops, with a…
Rycote microphone Foams are slip-on foam windshields, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality, open-cell acoustic…
The Super-Softie windshields are intended for rough service, robust enough for the most challenging news-gathering situations, when used with camera, hand or boom-mounted…
The Rycote Baseball series of windscreens have been designed specifically for use with microphones on boom poles used indoors to reduce 'swooshing' noise incurred when…
The Super-Shield Kits are complete windshield and shock mounting systems for shotgun microphones up to 300mm in length. An updated version of a well-proven Rycote design, this…
This selection includes 'ultra soft' cables, for use between a microphone mounted in a shock-mount and a pistol grip where it can be secured and attached to a normal, stiffer…
Pistol grips for use with Rycote microphone suspensions and an extension handle with a standard 3/8 inch thread, use when hand-holding microphones in the field. Soft Grip…
Canford Audio PLC is registered in England and WalesCompany registration no: 1385727 VAT no: GB 660116371
