UK Sales: 0191 418 1122 International: +44 191 418 1133
Tecpro is a 'two wire' or as it is sometimes known 'party-line' or 'ring' system which enables a number of people to take part in the same conversation. Each participant can hear all other participants on the same circuit while being able to talk to them simultaneously, so a full 'duplex' conversation can take place – similar to a telephone system. For further info see the Tecpro communication system overview.
Tecpro is a 'two wire' or as it is sometimes known 'party-line' or 'ring' system which enables a number of people to take part in the same conversation. Each participant can hear…
MS741 Master Station Combined power supply and 2 circuit station. Optional Extender unit increases system capability to four circuit operation. Designed to be the hub of a wired…
PS751, PS753 Power Supplies Free-standing, single & multi circuit power supplies Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom…
BA905 The BA905 is used to add an additional power supply to a Tecpro system. It isolates the additional power supply from the communications line, carrying only the DC power…
Tecpro beltpacks are tough, lightweight, remote intercom stations which are typically hung from the belt but can be used freestanding or mounted on a suitable surface. They offer…
BP167 - IP67 Rated Tecpro Beltpack Designed for the offshore industry, the IP67 rated Tecpro BP167 beltpack has been designed to withstand harsh, wet weather conditions and to be…
HS581 Headset Station, single channel, flush mount Offering similar facilities to a beltpack, the Tecpro HS581 is a single channel Headset Station suitable for flush mounting to…
HS591 The Tecpro HS591 handset is designed for use with a wired Tecpro intercom system in situations where a standard beltpack and headset would be inconvenient, in a theatre…
Series 2 Tecpro LS300 Loudspeaker Stations provide local monitoring of intercom circuits without the need to wear headphones. The built-in microphone makes them suitable for…
DMH320 Dual muff & SMH310 Single muff New generation high performance headsets specifically designed for communications use Retains the renowned durability and comfort…
LSM1 Plug-in dynamic gooseneck microphone, 250mm stem, fitted with XLR 4 pin female connector. Suitable for use with MS741 and LS300 series. Available in satin-nickel (LSM1) or…
The HH5 is a 'fist' type microphone for use in noisy environments. It is suitable for use with all Tecpro loudspeaker stations. To avoid the microphone becoming accidentally…
The new Tecpro LS391 is a compact, mains powered, listen-only, loudspeaker, designed to provide high quality monitoring of a single intercom circuit. The 5 watt output combined…
When a 'Call' alert signal is sent from a device, the latest Tecpro Call Lights are designed to catch your attention while controlling light spillage to minimise audience…
SL909 Xenon Strobe Lamp This unit can be connected at any point in a ring, and when a signal light is sensed, will produce high power flashes at approximately 1 per second from a…
AD903 Auxilliary input and output adapter Input and output on 4-wire side are transformer balanced, isolated and floating – reduces likelihood of hum and interference Very…
AD913 Simplex Radio Adapter Allows combined wired/radio systems to be assembled Interfaces with most good simplex radio transmitters Audio connections transformer balanced…
SB901 Splitter/Isolator box The SB901 Splitter Box provides an easy means of splitting a single circuit run into up to 4 spurs. It has one input, and four output sockets. Thus…
The SC931 Tecpro System Combiner provides a simple and convenient way to link two independent Tecpro wired intercom systems together without compromising the performance of either…
YL916 Headset Outstation 'Y'-lead This cable enables the connection of an external earpiece/headphones and separate microphone to any Tecpro headset outstation. Typical…
Wallmount connector plates specifically for use with the Tecpro intercom system. These are designed to specification BS1363, the British standard for electrical connection…
All single circuit and separately-cabled, dual circuit interconnections on the Tecpro Communications System, are made via twin-core screened cables terminated in XLR-3 type…
All components are available as spares to order. However, certain items are often requested as replacement parts, and for convenience, these are listed here.
Spare parts for the Tecpro DMH135 headset. Code Description 27-081 Cable for DMH135, terminated with XLR4F 27-082 Ear loudspeaker, 32 ohms for…
Spare parts for the Canford/Tecpro DMH220, DMH225 and SMH210 headsets. Ref. on Description Code drawing 1 Ear loudspeaker, 400 ohms…
Spare parts for the Canford/Tecpro DMH320, DMH325 and SMH310 headphones and headsets. Ref. on Drawing Description Code 1 Earpad…
Spare parts for the Canford/Tecpro DMH205, DMH220, DMH225, DMH285 and SMH210 headphones and headsets. Ref. on Description Code Drawing …
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
This site uses cookies to store information on your computer. By continuing we assume your permission to store cookies, as detailed in our privacy policy.