A comprehensive range of power supplies and adapter leads to facilitate the powering of Littlite task lights.
XP Power Supply
A 12W, 12V DC, 1A power supply that is supplied complete with interchangeable US, UK, EU, CN and AU mains plug clips. The DC lead has a 5.5mm x 2.1mm centre positive barrel jack plug connector, with a cable measuring 1.5m in length. Dimensions (HxDxW): 76.5 x 41.0 x 37.6mm
A 12V DC 2A power supply suitable for use with all Littlite incandescent, halogen and LED type lights. Having a case with fixing lugs, this unit can easily be wall mounted if required. Mains connection is via a 1.5m cable to a UK 3 pin 13A plug, outlet connection is via a 1.8m (6 foot) lead with 2.1mm DC coaxial plug.
12V DC 1.0A, plug-in, Euro (Shuko Plug) power supply, suitable for use with all Littlite incandescent, halogen and LED type lights with a captive lead and 2.1mm DC inlet socket. With a 1.8m captive cable, the outlet connection is a 2.1mm DC coaxial plug.
GXF-10 Power Supply
12V DC 1.0A, plug-in, US, 2-pin power supply suitable for use with all Littlite incandescent, halogen and LED type lights with a captive lead and 2.1mm DC inlet socket. A 1.8m captive cable is terminated with a 2.1mm DC coaxial plug.
BA Adapter Cable
BNC female to 2.1mm coaxial plug. Provides power to any Littlite task light with captive lead and 2.1mm DC inlet socket, from an unused BNC connector on a sound console.
CP-2 Adapter Cable
Cigarette plug to 2.1mm DC coaxial plug, 1.8m cable. Powers any Littlite task light with captive lead and 2.1mm DC inlet socket from a 12-volt, cigarette plug style power point.
GAD Adapter Cable
2.1mm DC coaxial socket to 2x 6.3mm female spade terminals. Provides connection of all power supplies listed to older Littlite task lights.
EXT Extension Cable
2.1mm DC coaxial socket to 2.1mm DC coaxial plug, 1,8m cable. Extension cable for all power supplies outlined in range.
LAD Power Cable
2.1mm DC coaxial socket to bare ends. For the connection of any of the listed power supplies to panel-mounted sockets.
LV Wiring Kit
A wiring kit for connecting hard-wired Littlite lamps to 12V power. Consisting of an in-line fuse and holder, 2x crimp female spade connectors, 2x crimp male spade connectors, 1x ring crimp terminal, 1x IDC splice and a set of instructions.
PYE Power Splitter
2.1mm DC coaxial socket to 4x 2.1mm coaxial plugs. Provides connection of up to four low-intensity or LED goosenecks to any listed power supply. (NOT recommended for use with high intensity task lights)
WYE Power Splitter
2.1mm DC coaxial socket to 2x 2.1mm DC coaxial plugs. Provides connection of two Littlite task lights to any listed power supply.