UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

12 October 2024

INTER-M V2-1000 POWER AMPLIFIER 2x 500W, Speakon outputs, 2U

Stock code
94-231
Brand
Inter-M
Model number
  • V2-1000
INTER-M V2-1000 POWER AMPLIFIER 2x 500W, Speakon outputs, 2U
INTER-M V2-1000 POWER AMPLIFIER 2x 500W, Speakon outputs, 2UINTER-M V2-1000 POWER AMPLIFIER 2x 500W, Speakon outputs, 2U

INTER-M AMPLIFIERS

These general purpose amplifiers from Inter-M offer a range of input and output channels along with different levels of output power. Other model dependant features include 3-pin XLR, balanced 6.35mm Jack inputs, or terminal inputs; Speakon or terminal outputs, thermal and DC output protection along with power on/off muting.

DPA Series

A series of amplifiers that provided audio output to such as small-sized shops to large-sized spaces like office buildings and schools where decentralized control is necessary. DPA amplifiers differ in output power and channel count with a suffix of 'S' denoting single channel, 'D' denoting dual channel, 'T' denoting triple channel, and 'Q' denoting quad channel. The number; 300, 600, 1200 etc denotes the rated output power per channel.

DPA amplifiers are designed with an AC/DC dual power supply that allows DC 24V supply through the battery even if AC power fails due to power outage. Since the DC power supply is an emergency power supply, it operates regardless of whether the power switch is 'on' or 'off'. When AC power is restored during DC power operation, the amplifier automatically switches back to AC. Using a priority function, alarm broadcasts can be configured to be output automatically in an emergency. When a contact is input to the priority terminal on the rear, the signal input is output before the PGM input. Using the AC remote terminal on the rear facing panel of the amplifier, a user can switch the power on/off from a remote location.

Monitoring on the front facing panels include signal, -10dB output level, clip, and protect LEDs. AC/DC power supply and standby status are illustrated by LEDs positioned above the main power on/off switch, which is also illuminated when on. In addition independent volume can be adjusted for each channel via rotary control.

All amplifiers in this series are compatible with 70V, 100V or 8ohm low impedance systems.

Single channel
DPA300S DPA600S DPA600S DPA1200S
Rated output 1x 300W 1x 600W 1x 900W 1x 1200W
Peak output 1x 480W 1x 680W 1x 1050W 1x 1260W
Frequency response 50Hz-20kHz 50Hz-20kHz 60Hz-20kHz 60Hz-20kHz
Weight 6.5kg 6.6kg 7.7kg 7.7kg
Multi-channel
DPA300D DPA600D DPA300T DPA150Q DPA300Q
Rated output 2x 300W 2x 600W 3x 300W 4x 150W 4x 300W
Peak output 2x 350W 2x 680W 3x 350W 4x 180W 4x 350W
Frequency response 50Hz-20kHz 50Hz-20kHz 50Hz-20kHz 50Hz-20kHz 50Hz-20kHz
Weight 7.1kg 8.1kg 8.2kg 6.8kg 8.4kg
Common Specifications

Input sensitivity: 1V, 10kohms. Signal to noise ratio: Greater than 103dB. THD: Less than 0.1%. Power consumption: 120-240V AC, 50/60Hz, DC 24V. Dimensions (WxHxD): 482 x 88 x 397mm, DPA300S/DPA600S/DPA300D/DPA150Q ; 482 x 88 x 450mm, DPA900S/DPA1200S/DPA600D/DPA300T/DPA300Q.

V2 Series

V2-1000, V2-2000, V2-3000, and V2-4000 amplifiers are 2U rack-mounting, fan-cooled designs capable of driving speaker systems at 2, 4 or 8ohms impedance. All models incorporate protection circuitry to prevent damage from open and short-circuit loads, heat sink over-temperature, and DC components in the audio signal.

The front panel has two cooling vents with screw access for dust filter removal, power switch, and two gain controls. LED indicators are provided for signal presence (green/orange) and signal-clip (red) for each channel, plus AC power (blue).

The rear panel has Speakon output connections, one for each channel, along with balanced 3-pin female XLR/6.3mm TRS jack combination and 3-pin Phoenix style connector inputs. Each channel also has an on/off clip limiter switch that reduces the internal operating level of the amplifier to prevent overdriving. A high pass filter for each channel can be switched between OFF/30Hz/50Hz to help conserve power along with protecting the connected loudspeakers. A single switch allows the user switch between Bridge/Stereo/Parallel modes whilst a final switch can be used to drive the amplifier with alternative gain structures.

V2-1000 V2-2000 V2-3000 V2-4000
Amplification class Class AB Class AB Class H Class H
Stereo Output
2 ohms 580W 900W 1650W 2100W
4 ohms 320W 530W 1000W 1300W
8 ohms 180W 300W 550W 700W
Bridged Output
4 ohms 1150W 1850W 3300W 4200W
8 ohms 700W 1100W 2000W 2600W
Damping factor >380 >450 >400 >400
Weight 10.95kg 11kg 12kg 12.1kg
Common specifications

Input sensitivity: 1.1V, 4ohms. THD: less than 0.05%. Frequency response: 5Hz-70kHz, -3dB; 20Hz-20kHz, +/- 0.3dB. Power source: 230/240V. Dimensions (WxHxD): 482 x 88 x 407mm, 2U.