CANFORD FSJ-LFH - FOIL SCREENED STRANDED CONDUCTOR INDIVIDUALLY JACKETED MULTIPAIR CABLE Low Fire Hazard
This D'n'A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene).
It is a low fire hazard ('LSOH') cable based on Canford’s FST-LFH twin conductor, foil screened cable, for installed applications. The construction is a number of these cables, each printed with a core identification, and sheathed overall in an LFH material. The individual cores are jacketed ready for termination directly into connectors etc.
||7/0.20mm (0.22mm²) tinned copper wire
||Foamed polypropylene, OD 4.0mm, red, black
||Aluminium/Polyester tape with 7/0.20mm, tinned copper drain wire
||LFH material, OD 4.0mm, yellow
||Each individual jacket sequentially numbered
||LFH material, black, printed with metre markings
||2 pair 10.1mm, 4 pair 11.3mm, 8 pair 15.1mm, 12 pair 17.7mm
||100pF/metre core to core, 198pF/metre core to core + screen
||81 ohms/km maximum
|Weight (kg/100 metres):
||2 pair 8.3kg, 4 pair 13.4kg, 8 pair 22.5kg, 12 pair 31.2kg
||Available in any multiple of 1 metre
‘FST’ is a registered trademark of Canford Audio Limited.