UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

5 October 2024

CANFORD IMPEDANCE CONVERTER AES/EBU, Universal mounting, BNC socket to solder terminals

Stock code
20-210
Brand
Canford
GTIN
5056704753464
CANFORD IMPEDANCE CONVERTER AES/EBU, Universal mounting, BNC socket to solder terminals
CANFORD IMPEDANCE CONVERTER AES/EBU, Universal mounting, BNC socket to solder terminalsCANFORD IMPEDANCE CONVERTER AES/EBU, Universal mounting, BNC socket to solder terminals

CANFORD UNIVERSAL SERIES CONNECTORS

A range of connectors, switches and cable glands mounted on insulating mouldings which fit the Neutrik ‘D’ series cut-out. Suitable for use with Canford Universal Connection Panels, connector plates, stageboxes or any application where a ‘D’ series cut-out is available and a non-’D’ housing connector (subject to size) must be fitted.

Available in two mounting versions, Plain 3.2mm diameter mounting holes or, on flush mounting black types only, M3 metal threaded inserts, permitting a faster assembly as shake-proofs and nuts are not required.

Flush Type

Flush mounting types are available with Black, White or Dawn Grey plates, pre-fitted with a variety of connectors, switches and cable glands. The white versions are well matched to connector plates used with electrical flush or surface mount boxes but care must be taken not to exceed the rear cable minimum bend radius, particularly with double sided BNC and F types.

Recessed Type

The recessed style is available in black, fitted with BNC double-sided or solder socket connectors. The front of the BNC socket is level with the front surface of the moulding giving enough room to connect and disconnect a BNC plug without the need for a fitting tool.

Impedance Converter AES/EBU

An AES/EBU impedance converter with a BNC female connector and wire termination points, mounted on an insulated plate suitable for mounting in a Neutrik ‘D’ series cut out.

For full details, see CANFORD IMPEDANCE CONVERTER AES/EBU – Universal mounting

Blank Plates

Black, White or Dawn Grey un-drilled flush plates are available and may be used to blank off unused holes in panels, stageboxes etc., or may be drilled to accept a wide variety of other connectors, switches, cable grommets and indicators.

Connection Options
Fitted Connection Recessed/Black Flush/Black Flush/White Flush/Grey M3 Tapped
BNC 12G (double-sided) 75 ohm 49-289 49-395 49-396 - 49-491
BNC (double-sided), 50 ohm 49-280 49-286 49-296 - 49-490
BNC (solder), 75 ohm 49-199 49-282 49-292 - 49-492
RJ11 (double-sided) - 49-181 - - -
5 pin DIN - 49-281 49-291 - 49-494
Phono (RCA) - 49-283 - - -
Switch, single pole changeover - 49-284 - - -
Switch, double pole changeover - 49-285 - - -
3.5mm 3-pole jack, black - 49-290 - - 49-493
F-type connector (double-sided) - 49-295 - - -
Binding post terminal (black) - 49-383 - - -
Binding post terminal (Red) - 49-385 - - -
Impedance Converter AES/EBU - 20-210 - - -
M16 Plain cable gland - 49-175 - - -
M16 Spiral cable gland - 49-176 - - -
M20 Plain cable gland - 49-177 - - -
M20 Spiral cable gland - 49-178 - - -
Blank Plate - 40-991 40-990 40-996 40-299

Optional accessories: M3 x 10mm Pozidrive mounting-screws, pan head (Pan) or countersunk head (Csk), zinc-plated clear-passivated (ZCP), or chemical black (CH/BLK); nuts, locknuts and shakeproof washers. Other screw and nut styles and sizes are also available, see Fasteners.

‘Universal connection system’ is a series designation originated by Canford Audio®. Copyright Canford Audio 1987.