UK Sales: 0191 418 1122         International: +44 191 418 1133

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

NEUTRIK DANTE INTERFACE

Neutrik NA2-IO-DLINE is an end-of-network breakout box which allows two XLR line-inputs to be integrated into a Dante network. Simultaneously, it can convert a Dante stream into two balanced XLR audio line-outputs.

Designed for harsh stage conditions, the NA2-IO-DLINE has a metal casing with lockable XLR and etherCON chassis connectors for both audio and network connections. A rubber sleeve offers added protection, but can be removed to allow mounting in equipment racks, floor boxes or under tables with optional rack panel or mounting brackets.

The unit requires an Ethernet switch that supports 48V PoE. If a switch without PoE is used, a PoE injector (class 1), compliant with 802.3af or 802.3at standards, must be placed in series.

General Specifications
Channels: 2 Input / 2 Output (Line level)
Supported sampling rates: 44.1, 48, 88.2, 96kHz
Bit depth: 16, 24, 32Bit
Latency: Based on user selection, 1ms default
Ethernet connection: 100 BASE-TX (supporting PoE)
Power consumption: 2W
Analog audio input
Input impedance: 6.6kOhm
Input level (balanced): 22dBu max.
Frequency response: 20Hz to 20kHz (+/- 0.5dB)
Dynamic range: > 100dB
Signal to noise ratio: > 100dB
THD + noise: < 0.01% @ +4dBu, A-weighting
Crosstalk: < -80dB @ 20kHz
Analog audio output
Output impedance: < 800Ohm
Output level (balanced): 16dBu max.
Frequency response: 20Hz to 20kHz (+/- 0.5dB)
Dynamic range: > 100dB
Signal to Noise Ratio: > 100dB
THD + noise: < 0.01% @ +4dBu, A-weighting
Crosstalk: < -80dB @ 20kHz

NA-MB-KIT Mounting Brackets

This bracket set is used to mount the NA2-IO-DLINE interface inside a floor box or below tables. A stepless angle from -90 to +90 degrees can be set. Fixing included.

NRP1RU-2A Rack Panel

This 1U panel facilitates the mounting of up to two NA2-IO-DLINE Dante interfaces within a rack. Four additional D-series cut-outs are provided, for the assembly of audio or network feedthroughs. The NA2-IO-DLINE can be mounted from the front or rear face. A blank plate is provided to cover one cut-out if only one NA2-IO-DLINE is used.

  Description Price (£) Add to basket
Show carriage
NEUTRIK NA2-IO-DLINE DANTE INTERFACE 2 line in, 2 line out   Stock code: 20-501
Please login for stock availability and lead times.
£299.90
NEUTRIK NA-MB-KIT MOUNTING BRACKETS For NA2-IO-DLINE Dante interface, pair   Stock code: 20-502
This item is discontinued. Please contact Technical Support for advice on alternatives.
NEUTRIK NRP1RU-2A RACK PANEL For NA2-IO-DLINE Dante interface   Stock code: 20-503
Please login for stock availability and lead times.
£25.00