UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

21 February 2024
  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

GLENSOUND DISTRIBUTION AMPLIFIERS

3 items
GLENSOUND SIGNATURE ADA 2:6 DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1U
GLENSOUND SIGNATURE ADA 2:6 DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1UGLENSOUND SIGNATURE ADA 2:6 DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1UGLENSOUND SIGNATURE ADA 2:6G DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1U, with gain controlsGLENSOUND SIGNATURE ADA 2:6G DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1U, with gain controls

Glensound Signature ADA 2:6 models are broadcast specification, six-way, stereo/mono, analogue, distribution amplifiers, designed to distribute audio to multiple destinations.

They have one stereo analogue input, which is distributed to 6 x stereo analogue outputs. A toggle switch on the front panel changes the operation of the unit to a mono distribution amplifier, with one input and twelve outputs. The switch is recessed to prevent accidental operation and also provides the user with clear visual indication of the current mode. An LED indicates that the unit is operational.

Glensound's Signature Series have internal power supplies as standard, in addition every unit, other than the PS1 power supply, has an external 12V DC input which may be used used as a primary power source, or for backup when connected to an optional Signature PS1 power station. The Signature case is in rack-mounting format, 1U high, and has extruded sides to which rack 'ears' are attached. These may be removed and fixed to the rear of the unit if desired. The extrusion has 'wings' at the side which may be used to mount the case to a flat surface.

The rear panel has two female three-pin XLR connectors for audio inputs and twelve male three-pin XLR connectors for audio outputs. All audio inputs and outputs are electronically balanced and can accommodate unbalanced connections if required. All outputs are protected, so a short circuit on one output will not affect any of the others. A 4-pin male type provides the +/-12v DC power input. AC power is connected by an IEC inlet. If the power fails, the primary input switches directly to the outputs via bypass relays

Inputs: +28dB maximum. Distortion: 0.013%THD at 100Hz, 1kHz and 10kHz, referred to +8dBu output. Noise: -89dB RMS at 'line up', unweighted, 22Hz to 22kHz. Outputs: +24dB maximum. Power source: 100-240V AC, 2.8watts at 230V AC. Dimension: 445 x 123 x 44(l x d x h) mm without rack ears; 482 x 123 x 44(l x d x h)mm with rack ears. Weight: 1.16kg.

Included accessories: Power cable, with UK 13A connector. 4x rack screws.
Optional accessories: Signature PS1 redundant power supply,


Signature ADA 2:6

Input gain controls are provided for both left and right inputs, with a range from -10dB to +20dB. These gain controls are accessed from the front panel and are multi-turn preset controls, recessed to prevent accidental operation).


Signature ADA 2:6G

Instead of input gain controls, this model has separate level controls, with a range of -10db to +15dB, for each of the twelve outputs. These gain controls are accessed from the front panel and are multi turn preset controls, recessed to prevent accidental operation.


Signature PS1 Power Station

Glensound Signature PS1 Power Station provides a back-up power supply to Glensound Signature Series equipment. It contains two switched-mode power supplies, each capable of powering up to three separate Signature Series models.

Glensound's Signature Series models have internal power supplies as standard, in addition every unit has an external 12V DC input which may be used used as a primary power source, or for backup when connected to the optional Signature PS1 power station. The Signature case is made of anodised aluminium in a rack-mounting format, 1U high, and has extruded sides to which rack 'ears' are attached. These may be removed and fixed to the rear of the unit if desired. The extrusion has 'wings' at the side which may be used to mount the case to a flat surface. As the PS1 is only 336mm wide without the rack ears, it can easily be installed inside equipment racks, and fixed vertically via the flush mounting side wings. This allows power distribution or backup, without taking up any rack space.

On the front panel, a pair of LEDs indicate that each power supply is on and active.

On the rear panel there is an IEC inlet for AC power and two groups of three 4-pin female XLR sockets providing power outputs. All outputs are individually fused so a short circuit on one will not affect any of the others. As well as providing a backup DC supply for up to six Signature Series units, the PS1 can alternatively act as a master power supply, distributing power to up to six Signature units.

Outputs: 6x +/- 12V outputs, each separately fused at 250mA. Power source: 100-240V AC, 10W at 230V AC. Dimensions: 336 x 123 x 44(l x d x h)mm without rack ears; 482 x 123 x 44(l x d x h)mm with rack ears. Weight: 0.85kg.
Included accessories: Power lead with UK 13A connector, 4x rack screws, 6x 2m length, 4-pin XLR leads.

  Description Price £
ex. VAT
Add to basket
Delivery
GLENSOUND SIGNATURE ADA 2:6 DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1U Stock code: 95-8976
Available in 1‑2 months Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£480.00
GLENSOUND SIGNATURE ADA 2:6G DISTRIBUTION AMPLIFIER 1x6 stereo, 2x12 mono, 1U, with gain controls Stock code: 95-8977
Available in 1‑2 months Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£510.00
GLENSOUND SIGNATURE PS1 POWER SUPPLY For Signature equipment, master PSU or back-up PSU Stock code: 95-8979
Available in 1‑2 months Ordered on demand, cancellations may incur charges, available in 1‑2 months. Need it sooner? Call us
£360.00